{"page":{"id":117742600476,"body_html":"\n      \u003cp\u003eRemove the 2 screws that attach the control housing to the factory shaft.\u003c\/p\u003e\n   \n      \u003cp\u003eRemove the 4 screws that hold the speaker cover plate on the bottom of the detector housing.\u003c\/p\u003e\n\n      \u003cp\u003eInstall the Anderson mounting plate reusing the speaker cover plate screws. Do not over-tighten screws. The angle of the detector display can also be adjusted by loosening the lock nut and turning the plastic bushing.\u003c\/p\u003e\n\n      \u003cp\u003eSlide down the foam grip to expose the handle screw hole. Install the provided screw through the handle and into the plastic bushing hole.\u003c\/p\u003e\n\n        \u003cp\u003eAnderson Detector Shafts P.O. Box 727 Ridgeway, Ontario L0S 1NO Canada\u003c\/p\u003e\n     ","created_at":"2023-05-23T11:41:58-04:00","published_at":"2021-02-17T21:37:10-05:00","updated_at":"2023-06-23T16:50:08-04:00","handle":"instruction-manuals__anderson-documentation__anderson-garrett-at-pro-gold-shaft-instructions","title":"Anderson Garrett AT Pro\/Gold Shaft Instructions"}}