{"product_id":"quest-scuba-tector-ii-detector","title":"Quest Scuba Tector II Underwater Metal Detector with Enlarged Mono Coil","description":"\u003cp\u003eThe \u003cstrong\u003eQuest Scuba Tector II\u003c\/strong\u003e is a sealed underwater metal detector rated to 200 feet (60 meters), built for one job: sweep the bottom and recover what dropped. Its 95 kHz pulse induction circuit stays silent in saltwater and black sand, the enlarged epoxy filled mono coil reaches deeper than the original Scuba Tector, and the one piece body has no open ports at all thanks to a sealed magnetic charging connection. One button runs everything. No fluff menu, no settings rabbit hole, just clean signals in the surf line, the river bottom, and the dive site, in your choice of Passion Orange or Stealth Black.\u003c\/p\u003e\n\u003ch2\u003eSimple on Purpose, Serious by Design\u003c\/h2\u003e\n\u003cp\u003eUnderwater recovery punishes complexity. Gloved hands, moving water, and limited air are no place for menu diving, so Quest built the Scuba Tector II around a single button and two ways of working: cruise scanning to cover a wide swath of bottom quickly, and pinpoint by edge to shrink the signal down to an exact dig spot. Pulse induction technology reads the decay of conductive targets instead of fighting ground minerals, which is why rings and coins sound off cleanly in wet salt sand that turns VLF machines into noise makers. When the coil crosses metal you get the alert your conditions demand: sound for murky water, vibration for zero visibility silt clouds, LED indication for the quiet approach, with three target alert modes to combine them. A loss alarm helps the detector come home from every dive, the rear thread accepts the included wrist lanyard or a rod extension for comfortable beach sweeping, and the magnetic charger snaps on with nothing to unscrew and no cap to lose. Salt rinse, snap on the charger, done.\u003c\/p\u003e\n\u003cfigure\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/1464\/9628\/files\/2025.101_OR_Inline.jpg?v=1786648203\" alt=\"Snorkeler with the Quest Scuba Tector II in blue water\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuest Scuba Tector II\u003c\/strong\u003e in Passion Orange or Stealth Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnetic USB charging cable\u003c\/strong\u003e for the sealed, port free charging connection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWrist lanyard\u003c\/strong\u003e that threads into the rear attachment point\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eScuba Tector II Performance Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e95 kHz pulse induction circuit with no falsing in saltwater and black sand environments\u003c\/li\u003e\n\u003cli\u003eFully submersible to 200 ft (60 m) in fresh or saltwater\u003c\/li\u003e\n\u003cli\u003eEnlarged epoxy filled mono coil that Quest rates for up to 30 percent more detection range than the original Scuba Tector\u003c\/li\u003e\n\u003cli\u003eCruise scanning for broad coverage plus pinpoint by edge for exact target location\u003c\/li\u003e\n\u003cli\u003eThree alert types: sound, vibration, and LED, with three target alert modes\u003c\/li\u003e\n\u003cli\u003eOne button control with adjustable sensitivity and automatic or manual tuning\u003c\/li\u003e\n\u003cli\u003eSealed magnetic charging connection, so there are no ports to flood or caps to lose\u003c\/li\u003e\n\u003cli\u003eBuilt in rechargeable Li-Po battery rated for about 14 hours per charge\u003c\/li\u003e\n\u003cli\u003eLoss alarm and rear thread for the wrist lanyard or a rod extension\u003c\/li\u003e\n\u003cli\u003eLight at about 13.4 oz (380 g), easy to clip to a BCD or beach bag\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eScuba Tector II at a Glance\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTechnology:\u003c\/strong\u003e 95 kHz pulse induction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaterproof rating:\u003c\/strong\u003e 200 ft (60 m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoil:\u003c\/strong\u003e enlarged epoxy filled mono coil\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlerts:\u003c\/strong\u003e sound, vibration, and LED with three alert modes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControls:\u003c\/strong\u003e one button, adjustable sensitivity, auto or manual tuning\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCharging:\u003c\/strong\u003e sealed magnetic connection, no open ports\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRuntime:\u003c\/strong\u003e about 14 hours per charge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e about 13.4 oz (380 g)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColors:\u003c\/strong\u003e Passion Orange\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWant to see how it stacks up against the rest of the family? The \u003ca href=\"\/products\/quest-xpointer-scuba-tector-underwater-pi-li-poly-metal-detector\"\u003eoriginal Quest Scuba Tector\u003c\/a\u003e is still in our lineup, and every submersible machine we carry lives in our \u003ca href=\"\/collections\/waterproof-metal-detectors\"\u003ewaterproof and underwater detectors collection\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eComplete Your Recovery Kit\u003c\/h2\u003e\n\u003cp\u003eA dive detector finds the target; the right tools get it in your pouch. The \u003ca href=\"\/products\/quest-scoopal-water-hunting-sand-scoop-for-metal-detecting\"\u003eQuest Scoopal sand scoop\u003c\/a\u003e lifts rings out of the bottom in one motion, and our \u003ca href=\"\/collections\/scoops-diving-tools\"\u003escoops and diving tools collection\u003c\/a\u003e covers everything from hand rods to travel poles for surf and shallow water work.\u003c\/p\u003e\n\u003ch2\u003eWhy Buy from Serious Detecting\u003c\/h2\u003e\n\u003cp\u003eSerious Detecting is an authorized Quest dealer, so your Scuba Tector II is genuine and ships with Quest's manufacturer warranty and technical support access. Browse the full \u003ca href=\"\/collections\/quest\"\u003eQuest metal detectors collection\u003c\/a\u003e, compare every \u003ca href=\"\/collections\/quest-pinpointers\"\u003eQuest pinpointer\u003c\/a\u003e side by side, or shop across brands in our complete \u003ca href=\"\/collections\/metal-detectors\"\u003emetal detectors\u003c\/a\u003e lineup.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eQuestions about the Scuba Tector II or help choosing your underwater setup? The detecting experts at Serious Detecting are here before and after your purchase.\u003c\/em\u003e\u003c\/p\u003e","brand":"Quest","offers":[{"title":"Default Title","offer_id":54429024747804,"sku":"2025.101 OR","price":199.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/1464\/9628\/files\/2025.101OR_001.jpg?v=1786647808","url":"https:\/\/seriousdetecting.com\/products\/quest-scuba-tector-ii-detector","provider":"Serious Detecting","version":"1.0","type":"link"}