seriousdetecting.comAnswer
May 20, 2026 - 03:57 PM
Mounting the GK19 requires removing the stock coil by loosening the cam-lock bolt on the lower shaft, sliding the stock coil's bracket off, and replacing it with the GK19's bracket using the included hardware. Align the coil's connector with the detector's cable plug, ensuring a firm connection, then tighten the cam-lock to secure the coil at your preferred angle. After swapping coils, perform a fresh ground balance in your hunting area, the GK19's smaller size and DD configuration may require slight sensitivity or threshold adjustments compared to your stock coil settings. To understand more about how coil design affects detector performance, visit our page on metal detector technologies.
