Anderson Whites Beach Hunter Hip Mount

Instructions for the Anderson Detector Shaft's Whites Beach Hunter Hip Mount.

The Anderson Hip Mount Kit for the Whites Beach Hunter Includes Two Stainless Steel Brackets with Attachment tape, 2" Belt with Buckle and Alcohol Wipes.

First, clean the back area of the detector housing with the supplied Alcohol Wipes and allow time for the area to dry.

 

Remove the red backing from the Attachment Tape and be careful not to touch the exposed adhesive surface. Apply the mounting plates on the back of the detector and press down with even pressure.

Install belt through mount bracket and adjust for size. Note: Brackets can be removed without causing damage by lightly prying between the brackets and detector housing with a flat screwdriver.