Wireless and Wired Metal Detector Headphones

Metal detector headphones let you hear the faint signals a speaker loses to wind, surf and traffic. Wireless headphones must match your detector's own system, such as Minelab's low-latency ML headphones, Garrett Z-Lynk, XP's DEUS II headphones or Nokta's aptX Low Latency sets. Wired headphones need the right plug, and hunting with the detector under water calls for waterproof headphones.

Filters View as:

Why Headphones Help You Hear More Targets

Faint signals are easy to miss through a detector's speaker when wind, surf or traffic noise is around you, and a closed ear cup brings them through clearly. Garrett recommends headphones to hear faint signals, particularly in noisy environments. On many detectors, such as the Minelab MANTICORE, the speaker turns off when headphones are connected. Battery runtime also changes with the audio you use: Garrett rates the Garrett AT Max at 15 to 25 hours of operation without wireless headphones and 10 to 20 hours with them.

Wireless or Wired: Match Your Detector's System

Every wireless link has a small audio delay, called latency. While the coil is moving, a delay means the beep arrives after the coil has passed the target, so one target can seem to sit in two places, one either side of where it really lies. Low-latency systems keep that delay short: Garrett rates its Z-Lynk CS-3 headphones at a 17 millisecond audio delay, 6 times faster than Bluetooth, and Nokta's Bluetooth headphones use aptX Low Latency for faster target responses than standard Bluetooth. Detector makers build their own wireless systems for that reason, so wireless headphones have to match the detector. Wired headphones need no pairing or charging; they only need the right plug.

Metal Detector Headphones by Detector System

Find your detector in the table to see which wireless headphones pair with it and what to use in the water. We hunt with these exact setups. Before you order, check the detectors named on the listing.

DetectorsWireless systemWireless headphones and modulesFor underwater hunting
Minelab MANTICORE, EQUINOX 900, EQUINOX 700, X-TERRA PRO, X-TERRA ELITEMinelab low-latency wirelessML 85, ML 105; WM 09 module adds wireless to headphones with a 3.5 mm (1/8 inch) plugWaterproof wired headphones
Minelab EQUINOX 600 and 800 (older models)Bluetooth aptX Low Latency and Minelab Wi-StreamML 80; WM 08 module for 3.5 mm (1/8 inch) headphonesEQUINOX waterproof wired headphones
Garrett Vortex VX5, VX7, VX9, AT Max, ACE Apex, Axiom, Axiom LiteGarrett Z-Lynk, 17 millisecond audio delayMS-3, CS-3; Z-Lynk receivers for other headphones; WT-1 transmitter for other detectorsGarrett submersible headphones for the Vortex series and AT Max; the ACE Apex, Axiom and Axiom Lite control boxes are not submersible
XP DEUS IIXP 2.4 GHz wirelessWS6 ST, WSA ST, WSA-XL STBH-01 bone conduction headphones, waterproof IP68 to 20 m (66 ft)
Nokta Legend 2, Simplex BT and ULTRA, ScoreBluetooth aptX Low LatencyNokta BT headphones (not waterproof)Nokta waterproof headphones; Legend 2 bone conduction headphones

Aftermarket makers such as DetectorPro, Killer B and Detecting Adventure build headphones in versions for specific detectors, such as the DetectorPro Gray Ghost Amphibian II for the Minelab EQUINOX, MANTICORE, X-TERRA and VANQUISH, so check the detectors named on the listing. For every accessory by model, see our Minelab, Garrett, XP and Nokta compatibility lists.

Waterproof Headphones for Beach, Surf and Dive Hunting

Waterproof and water resistant are different ratings. Water resistant headphones handle rain and splash: Garrett rates its CS-3 Z-Lynk headphones IP52, protected against light rain, and says they should never be submerged. Waterproof headphones are made to go under water. For hunting with the control box submerged you need waterproof headphones, because on detectors such as the EQUINOX and AT Max wireless audio stops working there: Minelab says wireless audio cannot be used with the EQUINOX control unit submerged, and Garrett says wireless operation is not possible with the AT Max fully submerged. On the EQUINOX, Minelab's waterproof headphones have a connector that seals the headphone socket. For dive work on the XP DEUS II, XP makes the BH-01 bone conduction headphones, waterproof to IP68, 20 m (66 ft). Aftermarket submersible sets include the DetectorPro Gray Ghost Amphibian II and the Killer B Thresher. Use the Waterproof filter at the top of this page to see every submersible set, and for the detector itself see our waterproof metal detectors and our Best Underwater Metal Detectors guide.

Headphone Jacks and Adapters: 1/4 Inch vs 1/8 Inch

Wired headphones use a 1/4 inch (6.35 mm) or a 1/8 inch (3.5 mm) plug, and some detectors use their own connector. The Minelab EQUINOX has a 3.5 mm (1/8 inch) waterproof headphone socket: it takes standard 1/8 inch headphones when the plug's overmold is less than 9 mm (0.35 inch) across, and 1/4 inch headphones with an adapter. Garrett's AT series headphones use a 2-pin connector, and Garrett makes a 1/4 inch headphone adapter for the AT Pro. Check your detector's socket before you order; the Headphone Adapters filter at the top of this page shows adapters and adapter cables, and more spare parts are in our parts and accessories.

Why Buy Your Metal Detector Headphones from Serious Detecting?

  • Free Shipping on Orders Over $99: Orders over $99 ship at no extra cost across the continental US.
  • Authorized Dealer for Every Brand We Carry: Showroom and local pickup in Ypsilanti, Michigan, and the full manufacturer warranty on every set of headphones.
  • Help Before and After You Buy: Headphone compatibility is the most common pre-order question we get. Our staff runs these exact wireless systems in the field, answers pairing, plug and water rating questions by phone at (844) 771-0707 or by email, and will confirm what works with your detector before you order.

Customer Questions & Expert Answers

Get real answers from outdoor explorers and our product experts. Browse questions about performance, features, and setup —or ask your own to make sure this gear fits your next adventure.

What headphones work with Minelab EQUINOX, MANTICORE and X-TERRA detectors?

The headphones that work with Minelab EQUINOX, MANTICORE and X-TERRA detectors depend on the model. The MANTICORE, EQUINOX 900, EQUINOX 700, X-TERRA PRO and X-TERRA ELITE pair with Minelab's ML 85 and ML 105 low-latency wireless headphones, and the WM 09 module adds wireless audio to headphones with a 3.5 mm (1/8 inch) plug on all five. The older EQUINOX 600 and 800 pair with the ML 80 and use the WM 08 wireless module. For wired use, the EQUINOX and MANTICORE take standard 3.5 mm (1/8 inch) headphones, and Minelab's waterproof headphones seal the headphone socket for underwater hunting. Aftermarket sets from DetectorPro and Killer B come in versions with the right plug for these detectors. The Minelab compatibility list shows every match.

Answered by John W. · November 2026

Are metal detector headphones necessary?

Metal detector headphones are not strictly necessary, but they help you hear more targets. Through the speaker, faint signals are easy to lose to wind, surf and traffic noise, and Garrett recommends headphones to hear faint signals, particularly in noisy environments. For casual backyard use, the speaker works fine.

If you hunt with the detector's control box under water, waterproof headphones are a must, because on detectors such as the Minelab EQUINOX and Garrett AT Max wireless audio stops working once the control box is submerged. Water resistant headphones are fine for rain and splash. See our metal detecting tips for more ways to get the most from your detector.

Answered by Dan P. · November 2026

Can I use Bluetooth headphones with my metal detector?

You can use Bluetooth headphones with some metal detectors, but low-latency headphones built for your detector work best. Standard Bluetooth adds a delay, so the beep arrives after the coil has passed the target and pinpointing suffers at normal swing speed. Detector makers use their own low-latency systems: Garrett Z-Lynk headphones such as the MS-3 and CS-3 (Garrett rates the CS-3 at a 17 millisecond audio delay, 6 times faster than Bluetooth), Minelab ML 85 and ML 105 low-latency headphones, Nokta Bluetooth headphones with aptX Low Latency, and XP's own WS6 ST, WSA ST and WSA-XL ST headphones for the XP DEUS II. Some detectors, such as the Minelab EQUINOX 600 and 800 and the Nokta Legend 2, also connect to standard Bluetooth headphones, with more delay. If your detector has a headphone jack and no wireless system, wired headphones are the better choice.

Answered by John W. · November 2026

Do headphones extend battery life on a metal detector?

Headphones can change battery life on a metal detector, but not always in the direction you expect. On many detectors the speaker turns off when headphones are connected; the Minelab MANTICORE does this. Wireless headphones add a radio link, though: Garrett rates the AT Max at 15 to 25 hours of operation without wireless headphones and 10 to 20 hours with them, and Nokta lists speaker and headphone use among the factors that change the Legend 2's 8 to 20 hour runtime. For the longest runtime from one charge or set of batteries, use wired headphones.

Answered by Dan P. · November 2026

Are 1/4 inch and 1/8 inch headphone jacks interchangeable?

No, 1/4 inch and 1/8 inch headphone plugs are not interchangeable on their own, but an adapter connects one to the other. A 1/4 inch plug is 6.35 mm and a 1/8 inch plug is 3.5 mm. The Minelab EQUINOX 900 and EQUINOX 700, for example, have a 3.5 mm (1/8 inch) socket and take 1/4 inch headphones with an adapter, and Garrett AT series headphones use a 2-pin connector, with a Garrett adapter for 1/4 inch headphones on the AT Pro. Find adapters and adapter cables in our headphone adapters. Check your detector's socket before ordering, or ask us and we will confirm the fit.

Answered by Richard T. · November 2026

What headphones should I use for underwater detecting?

For underwater detecting, use waterproof headphones made for your detector, not wireless headphones. On detectors such as the Minelab EQUINOX and Garrett AT Max, wireless audio stops once the control box is submerged: Minelab says EQUINOX wireless audio cannot be used with the control unit submerged, and Garrett says wireless operation is not possible with the AT Max fully submerged. Save wireless headphones for dry land, rain and shallow wading.

Submersible options include the Killer B Thresher for the Minelab EQUINOX, MANTICORE and X-TERRA, the DetectorPro Gray Ghost Amphibian II in versions for Minelab, XP, Garrett and Nokta detectors, Minelab's own waterproof headphones for the EQUINOX and MANTICORE, and XP's BH-01 bone conduction headphones for the XP DEUS II, waterproof to 20 m (66 ft). A water resistant rating covers rain and splash, not submersion.

For the detectors themselves, see our waterproof metal detectors and our Best Underwater Metal Detectors guide.

Answered by John W. · November 2026

Do metal detectors come with headphones?

Some metal detectors come with headphones and some do not, so check the box list on the listing. The Minelab MANTICORE includes ML 105 wireless headphones, the Garrett AT Max ships with MS-3 Z-Lynk wireless headphones, and the Garrett ACE 400 includes TreasureSound headphones. Many detectors are also sold in bundles with headphones.

If your detector has only a speaker, a pair of headphones is one of the first accessories worth adding, because headphones help you hear faint signals over wind and background noise. Wireless sets need to match your detector's system, so check the fit in our What Fits My Detector? finder.

Answered by Richard T. · November 2026

What are the best headphones for metal detecting?

The best headphones for metal detecting are the ones built for your detector's audio system and the places you hunt. For dry land, low-latency wireless headphones made for your detector, such as the Minelab ML 105 for the MANTICORE, the Garrett MS-3 or CS-3 for Z-Lynk detectors, or the XP WS6 ST for the XP DEUS II, keep the audio in step with the coil and free you from a cable. For beach and water hunting, choose waterproof headphones made for your model, such as the Killer B Thresher or DetectorPro Gray Ghost Amphibian II, because wireless audio stops once the control box is under water on detectors such as the EQUINOX and AT Max. For a detector with only a headphone jack, wired headphones with the right plug are the simplest choice. Use our What Fits My Detector? finder or the Minelab, Garrett, XP and Nokta compatibility lists to match a set to your model.

Answered by Dan P. · November 2026

Still have a question?

Ask our detecting specialists. We answer most questions within one business day, and publish the useful ones here so other detectorists benefit too.

0 / 1200

Your question and our answer will be published on this page, shown with your first name.

Protected by reCAPTCHA. We only use your email to send you the answer.