Lost pinpointers are every detectorist's nightmare. You're focused on digging that promising target, set your pinpointer down for a second, and suddenly it's vanished into the grass or sand. Dan's Lanyards solve this problem with a simple, bulletproof design that keeps your pinpointer attached to your belt at all times.
Why You Need a Pinpointer Lanyard
A good pinpointer costs $100-300, and losing one in the field is both expensive and frustrating. The problem isn't just carelessness - when you're digging deep targets or working in thick brush, it's easy to misplace your gear. A quality lanyard acts as insurance for your investment.
Dan's Lanyards extend up to 36 inches, giving you plenty of working range while keeping your pinpointer tethered. The retractable design means you won't have excess cord getting tangled in vegetation or dragging behind you as you hunt.
Built for Serious Metal Detecting
These aren't flimsy keychains - they're purpose-built for the demands of metal detecting. The high-quality materials handle the constant extension and retraction you'll put them through during long hunting sessions. Whether you're working sandy beaches where gear disappears into loose sand, or dense woods where everything blends together, this lanyard keeps your pinpointer within reach.
The USA manufacturing means consistent quality control and materials that won't fail when you need them most. You'll find cheaper options online, but when your expensive pinpointer is on the line, the extra cost for reliability makes sense.
Four Colors to Match Your Setup
Dan's offers four color options: red, black, orange, and slate gray. The bright colors (red and orange) make it easier to spot your gear if you do set it down, while black and gray blend with most detecting pouches and belts for a cleaner look.
Orange is particularly smart for beach hunters - it stands out against both sand and water. Black works well for relic hunters who prefer low-profile gear that doesn't advertise their presence.
Installation Tips
Most pinpointers have a small attachment point designed for lanyards. If yours doesn't, many detectorists drill a small hole in the back cap or use the belt holster as an attachment point. The key is finding a spot that won't interfere with controls or the tip.
Attach the other end to a sturdy belt loop or D-ring on your digging pouch. Don't use flimsy belt loops that might tear - the lanyard is only as strong as its weakest attachment point.
Perfect Complement to Quality Pinpointers
Whether you're running a Garrett Pro-Pointer AT, Nokta PulseDive, or Minelab Pro-Find, protecting that investment with a reliable lanyard just makes sense. It's a small upgrade that prevents a big headache.
The 36-inch extension works well with any pinpointer design, giving you enough reach for deep holes without excess slack when working shallow targets. The retractable mechanism keeps tension consistent and prevents the tangling issues you get with fixed-length cords.
Small Investment, Big Peace of Mind
For the cost of a tank of gas, you can protect hundreds of dollars worth of gear. Dan's Lanyards aren't glamorous, but they're the kind of practical accessory that proves its worth the first time you almost lose your pinpointer.
Every experienced detectorist has a story about lost gear. Don't let yours become one of them.
