XP Deus LCD Remote Control with Backlit Display and Speaker

The XP Deus LCD remote control is designed exclusively for the original XP Deus and is not compatible with the Deus II. If you own a Deus II, you need the Deus II-specific remote, which XP sells separately. The original Deus remote will not pair with Deus II coils or the Deus II master control unit. This remote control is a replacement unit for the original XP Deus system and includes the same back-lit display and speaker that comes standard with the Deus. Verify your detector model before ordering to ensure compatibility with your system.

You can operate the XP Deus without the remote control by using the WS4 or WS5 wireless headset, which has its own menu system for adjusting programs, discrimination, and ground balance. The headset-only setup reduces stem weight and simplifies the control interface for detectorists who prefer audio cues over visual confirmation. However, the remote control unlocks features the headset cannot access, including static all-metal mode for cache hunting, wireless MI-6 pinpointer pairing, and the ability to save up to 8 custom programs. Many Deus operators keep the remote in a pocket as a backup and mount it on the stem only when they need advanced settings or visual program feedback during complex site work.

The XP Deus remote control stores up to 10 coil serial numbers in its coil configuration menu. To pair a new coil, power on the remote, navigate to the coil configuration menu using the menu button, select an empty coil slot, and enter the coil's unique serial number printed on the coil housing or included documentation. Once saved, the remote will recognize that coil automatically when you power on the system. This allows you to switch between multiple coils without re-entering serial numbers each session. The user manual included with the remote provides step-by-step pairing instructions for each coil size.

The XP Deus remote control includes an integrated speaker that provides audio feedback during detection. The remote attaches and detaches from the stem in seconds using a simple thumb press on the bottom of the unit, allowing you to mount it for visual program feedback or store it in a pocket. The back-lit display and speaker combination gives you multiple ways to monitor target signals and system settings. Some Deus operators mount the remote on the stem for full visual and audio control, while others rely primarily on wireless headphones and keep the remote as a backup or for accessing advanced settings during complex site work.

The Basic program on the XP Deus remote control is a general-purpose mode with moderate discrimination, standard reactivity, and balanced sensitivity, making it suitable for open fields where target density is sparse. The Deus Fast program increases reactivity to separate small targets like coins and jewelry from iron trash in highly contaminated environments. Deus Fast runs a faster recovery speed, meaning it can detect a good target immediately after rejecting an adjacent iron nail. To understand how recovery speed and reactive processing power alter target separation, read our complete guide on metal detector technologies.

You can update the firmware on the XP Deus remote control using XP's free firmware update software, which you download from the XP Metal Detectors website. XP releases firmware updates periodically to improve performance, add features, and refine existing programs like Gold Field and Hot. The remote control provides access to 10 factory pre-set programs plus 8 empty program slots for saving custom programs, and firmware updates can enhance these capabilities. Always back up your custom programs before updating, as some firmware updates reset user-saved settings. Check the XP Metal Detectors website regularly for the latest firmware versions and update instructions specific to your Deus system.

The XP Deus remote control uses a rechargeable battery that powers the back-lit display, speaker, and wireless transmission to the coil and headset. Battery life varies based on backlight usage, speaker volume, and wireless transmission frequency. Running the backlight at maximum brightness or using the onboard speaker at high volume drains the battery faster than operating with the backlight dimmed and relying solely on wireless headphones. The remote control is designed for extended field use and is certified LONGTIME by XP, indicating it is built to last. Many Deus operators charge the remote after each hunt to ensure reliable power for the next session.

The static all-metal mode on the XP Deus remote control allows you to detect targets without moving the coil, which is useful for cache hunting, pipe tracing, and locating large buried objects like safes or metal drums. In standard motion-based modes, the Deus requires coil movement to generate a target signal, but static mode processes signals continuously, similar to a traditional VLF all-metal mode. This mode is less common in coin and jewelry hunting but valuable for relic hunters and treasure seekers working around foundations, walls, or suspected cache sites. The remote control is required to access static mode, as the WS4 headset menu does not include this feature.

XP offers a silicone protective case designed specifically for the remote control, which shields the display and buttons from moisture while maintaining button access and screen visibility. Detectorists hunting in light rain or coastal environments with salt spray use the silicone case to prevent water damage. The protective case is sold separately and provides an extra layer of protection for the remote's back-lit display and electronic components. If you plan to hunt in wet weather frequently, consider pairing the remote with the protective case or relying on the WS4 headset for control. The remote attaches and detaches from the stem in seconds, allowing you to store it in a protected pocket when conditions become challenging.

Access the remote's pinpointer settings using the menu button, select 'Pair Pinpointer,' and hold the power button on the MI-6 to initiate wireless pairing. Once connected, target tones route directly through your wireless headset or the remote's onboard speaker. The remote can also locate a lost pinpointer by triggering an audible alarm on the buried tool. This seamless wireless ecosystem is exclusive to the Deus remote control setup. To view compatible wireless pointers, replacement charging clips, or matching accessories for your layout, explore our full selection of genuine metal detector parts and accessories.