XP DEUS S-Telescopic Dive Shaft for XP Deus II Metal Detector

The S-Telescopic Dive Shaft is compatible with all XP Deus II remote controls and FMF coils (9-inch and 11-inch). The shaft is designed to work with Deus II coils without adapters. The handle is the XP S-TELESCOPIC Lite design, which accommodates the standard Deus II remote control holder. The integrated antenna connects wirelessly to the remote control and coil, maintaining the Deus II's cable-free architecture. This shaft does not work with the original XP Deus (Deus I) platform due to different mounting and antenna protocols. For the full range of compatible accessories, visit our XP metal detectors - authorized US dealer collection.

The S-Telescopic Dive Shaft collapses to 45cm (17.7 inches), which is roughly half the length of a standard two-piece Deus II shaft when disassembled. The collapsed profile fits in most dive gear bags, kayak hatches, and boat storage compartments where a full-length shaft would not. When extended, the shaft reaches 75cm (29.5 inches), providing sufficient reach for standing sweeps in shallow water or seated detecting from a boat. The compact collapsed size is the primary advantage for divers who need to transport the detector in tight spaces or pack multiple pieces of gear for a single outing. The shaft holds its extended length under normal sweep forces during detecting.

The plastic camlock pin prevents the Deus II coil from detecting the fastener during sweeps. Standard XP shafts use a stainless steel pin to secure the pressure plate, but stainless steel is a conductive metal that can trigger false signals when the coil passes over the pin during low, slow sweeps. Underwater detecting amplifies this issue because divers often work at extreme coil angles while navigating uneven bottoms. XP replaced the steel pin with a plastic pin on the Dive Shaft to eliminate this interference, which is detailed alongside other advanced engineering features on our metal detector technologies overview page.

Yes, the S-Telescopic Dive Shaft works on land and is an excellent, lightweight option for youth detectorists up to 1.2 meters (about 4 feet) tall. The compact settings reduce arm fatigue for shorter operators who struggle with full-sized frames. Adult detectorists can also use it on land, though the maximum extended length of 75cm is shorter than standard land stems and may require a more bent posture during sweeps. While its primary design intent is diving, its rapid deployment and small footprint make it a practical, highly packable alternative for quick park hunts or travel scenarios where gear bag space is limited.

The integrated antenna provides wireless connectivity to the remote control and coil. XP routed the antenna inside the shaft to protect the connection from physical damage during dives, where external cables can snag on kelp, rocks, and submerged structures. The integrated design eliminates one failure point compared to shafts with external antenna cables, which can develop breaks at the connection points after repeated flexing. The antenna is built into the shaft structure and maintains the Deus II's cable-free architecture. This internal routing protects the antenna connection from the harsh underwater environment while preserving the wireless communication between the detector components.

The S-Telescopic Dive Shaft weighs 285 grams (10 ounces). The reduced weight matters underwater, where neutral buoyancy and arm fatigue are primary concerns during long dives. The lightweight construction does not compromise rigidity: the monobloc lower stem design eliminates the wobble common in multi-piece shafts, keeping the coil stable during slow sweeps over uneven bottoms. The weight savings come from the compact telescoping mechanism and the elimination of redundant hardware found on adjustable shafts. For detectorists comparing shaft options across the XP accessory line, visit our metal detector parts & accessories collection.

The S-Telescopic Dive Shaft includes a dedicated lanyard attachment point on the holder for securing the Deus II remote control. The attachment point allows you to secure a lanyard from the remote control to the shaft. This prevents the remote control from sinking or drifting away if it detaches from the holder during a dive. The lanyard attachment is a dive-specific feature not found on standard land shafts, where losing the remote control is less of a concern. Divers typically use a short coiled lanyard or a fixed-length tether clipped to the remote control's lanyard loop and the shaft's attachment point. The remote control installs and removes with a quick-release mechanism.

The S-Telescopic Dive Shaft is fully waterproof and designed for underwater use with the Deus II detector. The shaft's construction features an integrated antenna, plastic camlock pin, and monobloc lower stem that support diving applications. The shaft does not have external cable entry points that would compromise waterproof performance. When using the detector for diving, the XP Waterproof Kit is required for the remote control and coil. The shaft itself is built to withstand underwater conditions and complements the Deus II's diving capabilities. For specific depth ratings and diving requirements, consult the XP Waterproof Kit specifications and the Deus II user manual.

The S-Telescopic Dive Shaft extends from 45cm when collapsed to 75cm when fully extended. Most divers set the shaft to the extended position before entering the water and leave it extended for the duration of the dive, as the extended length provides better reach and leverage during sweeps. The telescoping design allows the shaft to be adjusted between these two positions as needed. The compact collapsed length is useful for transport and storage, while the extended length provides the working reach needed for effective detecting in shallow water environments. The shaft maintains its set length during normal detecting operations.

The S-Telescopic Dive Shaft requires freshwater rinsing after every saltwater dive to prevent salt buildup in the telescoping mechanism and around the plastic camlock pin. Rinse the shaft with freshwater after saltwater use, paying attention to the coil mount area and the remote control holder, as salt can accumulate in the crevices and cause corrosion over time. After rinsing, allow the shaft to air dry in a shaded area before storing. The metal coil mount hardware benefits from occasional inspection and replacement if you notice pitting or rough threads. For additional care guidance, consult the XP Deus II user manual available on the manufacturer's technical support page.