Garrett 14" x 11" DD Reaper Search Coil for Ace Apex Metal Detector

The Garrett 14" x 11" DD Reaper coil is compatible exclusively with the Garrett Ace Apex metal detector. Garrett's Multi-Flex coil technology in the Apex platform is not backward-compatible with older ACE series models (ACE 150, 250, 300i, 400i), and prior ACE coils will not work with the Apex detector. The Reaper coil connects directly to the Apex's Multi-Flex connector and integrates with the detector's simultaneous multi-frequency operation. If you own an Apex and need a coil for tight spaces or trashy sites, explore Garrett Ace Apex metal detector, multi-frequency detecting for every hunt accessories for the full coil lineup.

The Reaper coil delivers 25% more ground coverage per sweep compared to the Apex's standard 8.5" x 11" coil. The larger 14" x 11" elliptical footprint reduces the number of overlapping passes required to search a given area, accelerating hunt time in open fields, parks, and farm sites. Hunters covering expansive terrain or working time-limited permissions benefit from the wider sweep, while the Double-D configuration maintains target separation even with the increased coil size. The tradeoff is slightly reduced maneuverability in dense brush or between close obstacles, where the stock coil or the smaller Viper coil excels.

The Garrett 14" x 11" Reaper coil housing is fully waterproof and can be submerged in water for shallow-water detecting along creek edges, swimming areas, and wet shorelines. The Ace Apex control box itself is weatherproof but not submersible, so the detector body must remain above water while the coil enters shallow streams, surf lines, or pond margins. The waterproof construction also protects the coil in rain, wet grass, and morning dew without performance degradation. Rinse the coil with fresh water after saltwater or mineralized-water hunts to prevent corrosion on the connector and hardware.

The Garrett 14" x 11" DD Reaper coil weighs approximately 20 ounces (567 grams), which is heavier than the Apex's stock 8.5" x 11" coil but balances well on the detector's shaft for extended swings. Hunters accustomed to lighter coils may notice increased arm fatigue during multi-hour sessions, particularly when sweeping over uneven terrain or holding the coil at a steep angle. Using a harness or adjusting the shaft length to distribute weight more evenly mitigates fatigue. The coil's durable construction justifies the weight for detectorists prioritizing depth and coverage over ultralight portability.

The Garrett 14" x 11" DD Reaper coil ships with a protective searchcoil cover designed to prevent scratches, abrasions, and impact damage when sweeping over rocks, gravel, stubble, and rough soils. The cover is highly recommended for field use, as the coil's large surface area contacts more ground obstacles per sweep than smaller coils. Without the cover, the housing can accumulate scuffs that eventually wear through the waterproof coating, compromising the coil's submersibility. Replace the cover if it tears or wears thin, as a damaged cover provides minimal protection and can trap moisture against the coil housing.

The Reaper coil's Double-D (DD) configuration generates a blade-shaped electromagnetic field that concentrates detection energy along a narrow central axis rather than radiating outward in a cone like concentric coils. This blade pattern excels at isolating individual targets in trashy sites where multiple metal objects lie close together, allowing the Apex to report distinct Target IDs for adjacent coins, nails, or bottle caps. DD coils also perform better in mineralized ground and saltwater environments by reducing ground noise, though the Apex's simultaneous multi-frequency operation already mitigates much of that interference. Cache hunters and relic detectorists working iron-contaminated homesites benefit most from the DD geometry. For additional guidance on coil selection and hunt strategies, visit our metal detecting tips and FAQs page.

The Garrett 14" x 11" Reaper coil works well for coin shooting in large parks, fairgrounds, and open schoolyards where targets are spaced widely and detection depth matters. The wider sweep covers more ground per pass, reducing hunt time when searching expansive lawns or athletic fields. However, in heavily trafficked tot lots, picnic areas, or sites with dense trash concentrations, the stock 8.5" x 11" coil or the smaller 6" x 11" Viper coil offers better maneuverability and pinpoint accuracy between closely spaced targets. The Reaper's strength is deep single coins and small caches rather than rapid-fire shallow clad recovery.

Garrett's Multi-Flex coil technology is a connector and wiring architecture introduced with the Ace Apex that enables the detector to transmit simultaneous multi-frequency signals through the coil and receive frequency-specific target data back. The Reaper coil is built with Multi-Flex circuitry, allowing it to operate with the Apex's simultaneous multi-frequency capability. Older ACE coils lack this circuitry and cannot communicate multi-frequency data, which is why they are incompatible with the Apex. Conversely, Multi-Flex coils like the Reaper will not work with single-frequency ACE models (150, 250, 300i, 400i) due to the different connector and protocol. This technology ensures the Reaper coil integrates seamlessly with the Apex's advanced detection system for optimal target identification across various soil conditions and target types.

The Reaper coil achieves greater detection depth on medium to large targets than the stock 8.5" x 11" coil due to its larger electromagnetic field and increased surface area. The manufacturer describes the Reaper as providing deeper detection depth, particularly effective for deeply buried coin and relic caches. Real-world performance varies with soil mineralization, target orientation, and discrimination settings. Small targets like gold earrings or thin silver dimes see less depth gain because the Reaper's field is optimized for broader coverage rather than pinpoint sensitivity. Hunters targeting deeply buried caches, large cents, or colonial relics benefit most from the Reaper's depth advantage, especially when working large fields or farm sites where deep targets are likely.

The Garrett Ace Apex automatically recognizes the Reaper coil when connected and adjusts its internal parameters for the coil's size and DD configuration, so no manual coil-type selection is required. Hunters may choose to increase sensitivity by one or two bars to maximize the Reaper's depth potential in low-mineralization soil, or reduce sensitivity in highly mineralized ground or electrically noisy environments to minimize false signals. The Apex's Custom mode allows discrimination adjustments to reject shallow iron while preserving deep non-ferrous targets, a useful pairing with the Reaper's depth capability. The coil integrates seamlessly with the Apex's simultaneous multi-frequency operation for optimal performance. Browse elliptical metal detector search coils for additional coil options across detector brands.

Garrett backs the 14" x 11" DD Reaper coil with a 3-year parts and labor warranty covering manufacturing defects, material failures, and workmanship issues. The warranty includes water-damage coverage for the coil housing itself, as the Reaper is designed and tested for full submersion during shallow-water detecting. Damage caused by impact, abrasion without a protective cover, or connector corrosion from inadequate rinsing after saltwater use is not covered. Garrett's warranty service is handled through authorized dealers like Serious Detecting, and the coil is manufactured in the United States under ISO 9001 certification guidelines. Keep your purchase receipt and register the coil with Garrett to expedite any warranty claims. Looking for a gift for a fellow detectorist? Check out holiday gifts for $60 plus for accessory ideas.