CooB 9" x 6.25" Stainless Steel Sand Scoop with Mixed Hexagon Holes

The CooB 9" x 6.25" sand scoop has a 1.2-inch (30.5mm) top hole designed to accept poles with a diameter around 1.2 inches. Standard hardware-store rake handles are typically 1.25 inches in diameter, so you'll need to shave approximately 1/8 inch off the handle or wrap the pole with electrical tape to create a snug fit. CooB manufactures carbon fiber poles specifically sized for this top-hole dimension, and those poles are sold separately on our CooB collection page. The top-tube fixation on this scoop is reinforced to handle torque from longer poles without loosening during extended hunts.

The mixed 7mm and 10mm hexagon holes on this scoop are sized to retain small ancient coins, thin gold chains, and fine jewelry while allowing wet sand and silt to drain quickly. The manufacturer describes this mixed-hole pattern as best for small ancient coins and finest jewelry, making it ideal for beach detectorists targeting tourist-zone drops. The 10mm holes clear coarse sand and small pebbles efficiently without clogging, while the smaller 7mm holes prevent valuable small finds from escaping. This combination ensures that single-size holes don't either retain too much material or let small gold slip through during your hunt.

The CooB 9" x 6.25" scoop is built from AISI 430 stainless steel with hand-welded seams and a polished finish, making it fully suitable for use in shallow surf and wet sand. The manufacturer recommends this model for beach, underwater, and surf detecting, and the corrosion-resistant steel maintains structural integrity in saltwater environments. The angled back wall provides a foot platform for pushing the scoop into submerged sand, and the mixed hole pattern drains water-logged material quickly. Rinse the scoop with fresh water after saltwater use to prevent mineral buildup on the welds.

The reinforced nose on the CooB 9" x 6.25" scoop features a no-hole zone at the front edge, which strengthens the leading edge for repeated digging in compacted wet sand and gravel. The solid metal surface at the nose prevents the scoop from flexing or bending when you're levering it through hard-packed layers, and it also provides a clean background for spotting small finds before they wash through the basket. Beach hunters working tidal zones rely on this reinforced design because it withstands the impact forces of breaking through crusty surface layers without deforming over time.

The internal stiffening rib runs the length of the CooB 9" x 6.25" basket to prevent flexing when the scoop is loaded with wet sand or gravel. The rib distributes stress across the entire structure rather than concentrating it at the weld points, which keeps the basket rigid when you're pulling full loads from knee-deep surf. This design feature is particularly important for medium-duty scoops like this one, where the balance between weight and strength determines if the scoop holds its shape through extended hunts. Our team has seen CooB scoops with stiffening ribs maintain their geometry after years of beach use.

The CooB 9" x 6.25" scoop is designed for coarse sand, small pebbles, clean sand, and silt, and the manufacturer recommends it for work in both water and dry sand. The mixed 7mm and 10mm holes drain dry sand efficiently without excessive shaking, and the hexagon pattern prevents clogging when you're working in areas with fine shell fragments or organic debris. Some detectorists report that the scoop is slightly tougher to use in gravelly areas because the larger stones can wedge in the hexagon holes, but rinsing the basket or tapping it against your boot clears the blockage. For more guidance on scoop selection, visit our metal detecting tips page.

The angled back wall on the CooB 9" x 6.25" scoop provides a stable platform for your foot, which allows you to transfer digging force through your leg rather than relying solely on your wrist and forearm. When you step on the angled surface, your body weight drives the scoop into the sand, reducing the repetitive stress on your hands during multi-hour hunts. Beach detectorists working long tide windows report that this ergonomic feature lets them maintain digging pace without developing wrist fatigue or forearm soreness, and the angle is steep enough to prevent your foot from slipping off during forceful pushes.

The CooB 9" x 6.25" scoop is constructed from AISI 430 stainless steel, which the manufacturer describes as showing high characteristics of corrosion resistance in aggressive environments. This material choice makes the scoop suitable for repeated use in saltwater conditions at the beach, underwater, and in surf zones. The hand-welded seams and polished finish are designed to withstand exposure to saltwater during your detecting sessions. Inspect the welds periodically for any signs of stress or cracking to ensure the scoop maintains its structural integrity. For additional care tips and recovery techniques, explore our sand scoops for metal detecting collection.