XP WS6 ST Wireless Headphones for Deus II Metal Detector

The WS6 ST headphones are compatible with all XP Deus II metal detectors running firmware version 4.0 or later. You'll need to update your detector to V4 through the XP software before pairing the WS6 ST, as earlier firmware versions don't support the advanced signal processing and control features built into this headphone model. The update is free and available through XP software via USB connection. Once updated, the WS6 ST pairs with any Deus II coil (22.5cm, 28cm, or 34x28cm) and works in all three configurations: slave to the remote, master with a secondary wireless headphone, or master standalone clipped directly to the coil. Check xp deus ii metal detector – all models, configs & accessories for firmware update instructions and compatible coil options.

Yes, the WS6 ST functions as a complete stand-alone control system for your Deus II, eliminating the need for the remote control. When you clip the WS6 ST directly to the XP backphone and pair it with the coil, you get full access to all detector settings, target ID, discrimination, ground balance, and program selection through the headphone's 64x64-pixel screen and control buttons. This configuration creates an ultra-light 750-gram setup with the 22.5cm coil, making it ideal for long park hunts or beach sessions where you want minimal swing weight. The detachable control module also mounts on the stem if you prefer the screen at eye level, and you can add a secondary wireless headphone like the WSA-ST or WSA XL-ST for audio while keeping the WS6 ST as your master controller. The stand-alone mode works with all Deus II coils and programs.

The WS6 ST features a lithium battery that delivers up to 15 hours of runtime on a full charge. It utilizes USB Type-C fast charging, allowing the unit to charge from empty to full in under three hours. The built-in screen displays real-time battery status for both the headphones and the paired coil, ensuring you receive low-battery warnings well before the unit powers down. (Note: Extreme cold weather may slightly reduce lithium battery efficiency).

The WS6 ST is rain-resistant but not waterproof or submersible. The housing can handle light rain, mist, and splashes typical of beach hunting, but it should never be submerged. If you are wading in the surf, keep the headphones above the waterline. Only the Deus II search coil is fully waterproof for submersion.

The WS6 ST features next-generation electronics, advanced signal processing, and USB Type-C charging that the original WS6 lacks. The new electronics improve detection performance on deep targets in mineralized ground when paired with Deus II firmware V4, and the advanced signal processing delivers better target separation in iron-heavy sites. The WS6 ST also includes a larger sound library and a four-band equalizer for more audio customization. The four-band equalizer provides more audio customization than earlier models. USB Type-C charging is faster and more convenient than the older micro-USB port, and the WS6 ST's detachable control module clips to the backphone or mounts on the stem for two ergonomic configurations. The WS6 ST weighs 82 grams and offers 15-hour battery life. The WS6 ST is optimized for the Deus II's multi-frequency platform and requires V4 firmware. Explore metal detector headphones to compare wireless options across brands.

Yes, when the WS6 ST is running in master mode (controlling the coil), you can pair a secondary wireless headphone for audio while the WS6 ST handles all detector settings and target ID display. XP designed this two-headphone configuration for detectorists who want the control module mounted on the stem at eye level but prefer lightweight audio-only headphones on their head. Compatible secondary headphones include the WSA-ST, WSA XL-ST, and wired FX03 models. The secondary headphone receives the same stereo audio signal as the WS6 ST, so you get identical target tones and audio profiles. This setup adds weight compared to the standalone WS6 ST configuration, but it's useful in parks and tot lots where you're checking the screen frequently. The pairing process is quick and persists across hunt sessions.

The WS6 ST control module detaches from the headphone ear cups and clips into the XP stem mount bracket, which installs on the lower or upper stem depending on your preference. To detach the module, press the release tabs on both sides of the headphone frame and slide the module out of the clips. The module secures into the stem bracket for stable mounting, positioning the 64x64-pixel screen at eye level for quick target ID checks. You'll need to pair a secondary wireless headphone like the WSA-ST for audio when the WS6 ST is stem-mounted, as the ear cups stay home. Check with your dealer about stem mount bracket availability. The stem mount fits all XP S-telescopic and standard carbon stems. We've used this configuration in urban parks where we're digging 50-plus targets per hour and need faster access to discrimination settings than a belt-mounted remote provides.

No, the WS6 ST is designed exclusively for the XP Deus II and requires firmware version 4.0 or later to function. The WS6 ST is not compatible with original Deus or ORX models. The WS6 ST's electronics and four-band equalizer are optimized for the Deus II's multi-frequency FMF coils and the V4 firmware's target separation algorithms, so pairing it with older detectors would bypass the features that justify the upgrade. For help choosing headphones across XP's detector range, contact our team.

The WS6 ST package includes the wireless headphones with integrated control module and a USB Type-C charging cable. A USB power source is required for charging. The headphones ship with the control module pre-attached to the ear cups, but you can detach it for stem mounting using the release tabs on the frame. Additional accessories like stem mounts are available separately. The WS6 ST pairs wirelessly with your Deus II coil out of the box once you've updated the detector to firmware V4, no additional cables or adapters are required for field use.

The WS6 ST's four-band equalizer lets you adjust bass, low-mid, high-mid, and treble frequencies independently, giving you more control over which target tones you emphasize and which you suppress. In iron-heavy sites, we boost the high-mid band to make silver and copper signals stand out while cutting the bass band to reduce iron grunts and nail chatter. Beach hunters working wet sand often boost treble to sharpen gold ring signals and cut bass to minimize ground noise from saltwater mineralization. The four-band EQ provides precise audio customization. The four-band EQ allows detailed audio tuning for different hunting conditions. Learn more about how audio processing and metal detector technologies work together in our reference library.

Yes, the WS6 ST operates in cold weather and snow. Like all lithium batteries, runtime may decrease in very cold conditions. Battery performance may vary in extreme cold. The rain-resistant housing keeps snow and sleet out of the electronics, but the ear pads get cold against your skin, consider wearing a thin beanie under the headphones or switching to over-ear winter covers. The 64x64-pixel screen provides clear target information. The control buttons are designed for field use. Maintain normal operating distance between headphones and coil in cold weather. Store the WS6 ST indoors between hunts to prevent condensation inside the housing.