Minelab 10" x 5" Elliptical Coil Cover for X-TERRA Series Detectors

This coil cover is compatible with the Minelab X-TERRA 705, 505, 305, 70, 50, and 30 metal detectors when equipped with the 10-inch by 5-inch elliptical search coil. The cover is designed to fit the elliptical coil geometry. If your X-TERRA detector came with a different coil size (such as a round concentric coil or a larger elliptical), this cover will not fit. Verify your coil dimensions before ordering to ensure proper compatibility with the 10x5 elliptical coil.

The skid plate absorbs direct impact from rocks, roots, and abrasive ground before it reaches the coil housing. X-TERRA detectors with the 10x5 elliptical coil work well in tight spaces where larger coils can't reach, but those same environments often have exposed rocks and concrete edges that scrape the coil shell with every swing. The cover takes the hit and wears down over time, so you replace an inexpensive skid plate instead of the coil when abrasion damage accumulates. Detectorists working construction sites, old homesteads with brick rubble, or mineralized washes see the most benefit from this protection.

The coil cover is designed to fit without adding significant bulk to the 10x5 elliptical coil, helping you maintain the maneuverability that makes the elliptical coil effective in trash-dense sites and tight spaces. The cover fits the coil geometry precisely and is designed to stay secure during swings without shifting or creating drag that would alter your sweep pattern. The elliptical coil's compact profile remains effective for navigating confined areas and working around obstacles during extended hunt sessions.

Cover lifespan varies based on hunt frequency and ground conditions. Beach hunters working wet sand with heavy quartz and shell content will see wear develop over time, with the rate depending on how much ground contact occurs during each hunt. The cover's job is to wear down instead of the coil housing, so visible thinning or surface scuffing is normal and indicates the cover is doing its work. Replace the cover when wear becomes visible and before the cover wears through in a spot, exposing the coil shell underneath to further abrasion.

The cover is designed to fit over the coil housing of the 10x5 elliptical coil. The cover should fit snugly without gaps when properly seated. If the cover does not seat properly, verify you have the correct cover for the 10x5 elliptical coil geometry, as covers for round or larger elliptical coils will not fit this model. Check that the cover edges are fully seated and the cover sits flush against the housing to ensure proper protection during use.

This cover is designed specifically for the 10-inch by 5-inch elliptical coil on X-TERRA series detectors only. Coil dimensions and mounting systems vary across Minelab product lines, so a cover made for the X-TERRA 10x5 coil will not stretch or seat properly on coils from different detector families. If you own a detector outside the X-TERRA series, verify your coil dimensions and check for a cover designed for that specific coil model to ensure proper fit and protection.

Replace the cover when you see thinning spots, cracks, or holes that expose the coil housing underneath. The cover's purpose is to absorb abrasion and impact so the coil shell stays intact, and visible wear indicates the cover is doing its job. Continuing to hunt with a worn-through cover defeats the protection benefit and puts your coil housing at risk. Keep a spare cover on hand if you hunt frequently in rocky or abrasive environments, so you can swap it out as soon as wear becomes visible.

The cover is designed as a protective accessory for the 10x5 elliptical coil on X-TERRA series detectors. Its function is to provide physical protection for the coil housing against abrasion and impact from rocks, roots, and rough terrain. The cover fits over the exterior of the coil housing. When properly installed on the 10x5 elliptical coil, the cover protects the coil shell from wear while you hunt in challenging environments with exposed obstacles and abrasive ground conditions.

This cover is designed to protect the 10x5 elliptical coil housing from abrasion and impact during beach hunting and other environments. The cover prevents sand and debris from accumulating in scuffs and scratches on the coil housing. If you hunt in wet conditions or beach environments regularly, rinse the cover and coil with fresh water after each session to remove salt and sand buildup that can cause long-term wear. Regular cleaning helps maintain both the cover and the coil housing underneath.

This cover is sized specifically for the 10-inch by 5-inch elliptical coil and will not fit other coil sizes or shapes. Attempting to stretch this cover over a larger coil or a round concentric coil will result in poor fit, gaps, and potential tearing. If you own a different X-TERRA coil (such as a 9-inch concentric or a larger elliptical), you need a cover designed for that coil's specific dimensions. Verify your coil size before ordering to ensure proper fit and protection.