Need to pair a new coil with your XP DEUS II? The built-in Auto Detect feature makes it fast and easy—no serial number entry required. As long as your coil is connected to the charging clip, the remote will detect and pair it automatically.
Here’s how to do it step-by-step.
What Is Auto Detect?
Auto Detect allows the DEUS II Remote to automatically find and pair with any coil that’s connected to a charge clip. It’s the quickest way to register a new coil or re-establish connection after a reset—no menus to dig through, no manual serial number entry.
How to Pair a Coil Using Auto Detect
-
Power On the XP DEUS II Remote
Press and hold the power button to turn on your remote. -
From the Home Screen, Press the OPTION Button
This opens the main settings menu. -
Navigate to the Pairing Menu and Select the Coil Icon
-
Use the + and – buttons to toggle between device types.
-
Make sure the coil icon is selected, then press Select once to start pairing.
-
-
Connect the Coil to the Charging Clip
Plug the coil into the USB charging clip. This powers it up just enough for the remote to detect it. -
Wait for the Coil to Be Detected
The remote will display the coil’s serial number once it finds the signal. -
Press the Center Select Button to Confirm
Your coil is now successfully paired and ready for use.
Pro Tips
-
Make sure only one coil is connected to a charger during pairing to avoid confusion.
-
The coil must be fully seated in the charging clip to power on and be detected properly.
With XP’s Auto Detect feature, pairing a new coil takes just a few seconds. Whether you’re upgrading to a different size or setting up your detector for the first time, this streamlined method gets you in the field faster.
Need Help or Accessories?
The team at Serious Detecting is here to support you with expert advice, compatible XP coils, charging clips, and more. Reach out any time—we’re ready to help.
Let me know if you’d like a matching version for a quick-start insert, video captioning, or printed instructions!
