Relic & Treasure Metal Detectors

Relic and treasure metal detectors are built for old ground: homesites, farm fields and battlefields where nails and iron lie next to the buttons, buckles and silver coins you came for. The detectors we recommend tell iron from good targets, separate targets that lie close together and reach deep ones. Our relic picks are compared below the products.

Military Discount: Active or retired U.S. military may be eligible for 15% off select Minelab detectors. See Military Discount Metal Detectors for details.

Open Box: Metal detectors with damaged or opened packaging, offered at a reduced price. Full manufacturer’s warranty included. Questions about a specific unit? Call us. See Open Box Metal Detectors.

What Makes a Good Detector for Relics, Coins and Treasure

Old sites are full of iron: square nails, wire, tin and plow parts, mixed with mineralized soil. The relic and treasure detectors we recommend share four traits.

  • Iron discrimination and iron audio: controls such as Iron Bias, Iron Filter, Iron Volume and Iron Audio let you hear iron at a lower tone or volume instead of losing it, so a copper button next to a nail still stands out. The Minelab MANTICORE goes further with a 2D target ID map and custom ferrous limits.
  • Recovery speed: a faster recovery setting separates targets that lie close together, which matters most on iron-packed homesites. A slower setting adds depth on open ground. The Nokta Legend 2 runs recovery speed 1 to 10, the Minelab EQUINOX 900 and MANTICORE up to 8, and the XP DEUS II calls it Reactivity, 0 to 5.
  • Depth on deep relics: a larger coil covers more ground and reaches deeper on open fields, while a smaller coil fits between iron. Steady ground balance (automatic, manual or tracking) keeps mineralized soil from hiding faint targets. For large, deep targets such as caches, a two-box deep seeker or a deep seeking detector reaches past what a standard coil can.
  • Frequency: simultaneous multi-frequency detectors such as Minelab Multi-IQ, XP FMF and Nokta SMF transmit several frequencies at once, which keeps target ID steadier across mineralized ground and wet sand. Single-frequency VLF detectors are still proven relic machines: lower frequencies favor large and high-conductive targets such as silver and copper, higher frequencies favor small and low-conductive targets. See our multi-frequency metal detectors for every model we carry.

Relic and Treasure Metal Detectors Compared

FeatureMinelab VANQUISH 360Minelab VANQUISH 560Garrett ACE ApexGarrett AT MaxNokta Legend 2Minelab EQUINOX 900XP DEUS IIMinelab MANTICORE
TierFirst relic detectorFirst relic detectorFirst relic detectorMid-rangeMid-rangeMid-rangeFlagshipFlagship
TechnologyMulti-IQ simultaneous multi-frequencyMulti-IQ simultaneous multi-frequencyMulti-Flex: Multi-Frequency, Multi-Salt, or 5, 10, 15, 20 kHzSingle frequency VLF, 13.6 kHzSMF multi-frequency, or 4, 10, 15, 20, 40 kHzMulti-IQ, or 4, 5, 10, 15, 20, 40 kHzFMF, or 49 single frequencies, 4 to 45 kHzMulti-IQ+, or 5, 10, 15, 20, 40 kHz
Iron HandlingIron Bias fixed at High, fixed Ferrous VolumeIron Bias 4 levels, Ferrous Volume 10 levelsIron Audio, 8 Iron Volume levels, 8 iron notch pixelsIron Audio in all modes, iron discrimination 0 to 44Iron Filter 1 to 9, Tone Volume, FerroCheckAdjustable Iron Bias, Iron Volume, ferrous tone breakIron Volume 0 to 10, notch2D ID map, custom ferrous limits
Target ID-19 to 99-19 to 990 to 990 to 991 to 99-19 to 990 to 992D map, 0 to 99 with ferrous indication
Standard CoilV10X 10 x 7 inch DDV12X 12 x 9 inch DD6 x 11 inch Viper DD (8.5 x 11 inch Raider on Raider packages)8.5 x 11 inch PROformance DDLD28 11 inch DD and LD21 8 x 5.5 inch DDEQX 11 11 inch DD and EQX 06 6 inch DD9 inch, 11 inch or 13 x 11 inch FMF, by packageM11 11 inch DD
WaterproofIP68, 5 m (16 ft)IP68, 5 m (16 ft)Coil submersible, control box notDetector and coil, 3 m (10 ft)IP68, 5 m (16 ft)IP68, 5 m (16 ft)Coil and RC remote IP68, 20 m (66 ft) with the red capIP68, 5 m (16 ft)
Weight2.6 lb (1.16 kg)2.8 lb (1.26 kg)2.5 lb (1.13 kg)3.03 lb (1.4 kg)2.6 lb (1.2 kg)2.8 lb (1.27 kg)From 1.8 lb (0.82 kg), RC remote on the belt and 9 inch coil2.9 lb (1.3 kg)
Wireless AudioNo, 3.5 mm wiredBluetooth LE Audio (LC3)Z-Lynk built inZ-Lynk built in, MS-3 headphones in the boxBluetooth aptX Low Latency headphones in the boxLow-latency, ML 85 headphones in the boxFully wireless coil and remote, XP wireless headphones in WS6 and WSA packagesLow-latency, ML 105 headphones in the box
PowerBuilt-in lithium-ion, up to 10 hoursBuilt-in lithium-ion, up to 10 hoursBuilt-in lithium-ion, up to about 15 hours4 AA, 15 to 25 hours6700 mAh lithium-ion, 8 to 20 hours5100 mAh lithium-ion, built inRechargeable lithium polymer, coil 8 to 20 hours, remote 15 to 30 hours6800 mAh lithium-ion, built in
Warranty3 years3 years3 years3 years3 years3 years5 years, 2 years on batteries3 years

Best Metal Detectors for Relic and Treasure Hunting, by Experience Level

  • A first relic detector: the Minelab VANQUISH 360, for a beginner who wants simple presets: Park, Beach and All Metal modes.
  • A first detector for plowed fields: the Minelab VANQUISH 560 adds a Field mode to the Park and Beach modes of the 360.
  • Trashy homesites on a budget: the Garrett ACE Apex, whose narrow Viper coil fits between iron. Keep the control box above the waterline.
  • A proven single-frequency relic machine: the Garrett AT Max, with manual and automatic ground balance for mineralized soil.
  • Iron-packed homesites: the Nokta Legend 2. We recommend the smaller LD21 coil with a higher recovery speed for iron clusters, and Relic mode for deeper targets.
  • Fields, parks and the beach with one detector: the Minelab EQUINOX 900, with Park, Field, Beach and Gold modes.
  • Light, wireless relic hunting all day: the XP DEUS II, with a Relic program among its 12 factory programs.
  • The most target detail on iron: the Minelab MANTICORE, with sensitivity from 1 to 35. Plan some hours on known targets before you rely on its 2D map.
  • GPS records of a field: the Minelab CTX 3030 runs FBS 2 and logs FindPoints and WayPoints with built-in GPS, so you can return to a productive spot.
  • One frequency at a time, chosen for the site: the Minelab X-TERRA PRO lets you pick 5, 10 or 15 kHz on land and runs 8 kHz in Beach mode. It is IP68 to 5 m (16 ft).
  • Multi-frequency with a single-frequency option: the Minelab X-TERRA ELITE runs Multi-IQ simultaneous multi-frequency in Park, Field and Beach modes, adds a 15 kHz single frequency in Park and Field, and has Iron Bias from -1 to 2 and the same IP68 rating to 5 m (16 ft).
  • Deep caches and large relics: the XP XTREM Hunter is an FMF two-box deep seeker that runs from the DEUS II remote.
  • Shipwreck coast and diving: the Fisher CZ-21 runs 5 and 15 kHz at the same time for wet salt sand and is submersible to 76 m (250 ft).

Our Best Metal Detectors for Relic Hunting guide goes deeper into settings and sites, and the Detector Finder narrows the choice by budget and ground.

Relic and Treasure Hunting Gear: Pinpointers and Digging Tools

A pinpointer finds the target in the hole so you dig less and do not cut a button or buckle in half. The Garrett Pro-Pointer AT is waterproof to 6 m (20 ft) with an IP68 rating, and the XP MI-6 pairs with the XP DEUS II over its wireless link. Cut clean plugs with a relic digger or shovel from our shovels, diggers and picks, including Lesche and King of Spades tools made in the USA by W.W. Manufacturing. Keep finds and trash apart, and carry the detector safely, with our bags, pouches and covers, and hear faint, deep signals with metal detector headphones.

Why Buy Your Relic and Treasure Metal Detector from Serious Detecting?

  • Free Shipping on Orders Over $99: Your relic and treasure metal detector ships at no extra cost across the continental US.
  • Authorized Dealer for Every Brand We Carry: Showroom and local pickup in Ypsilanti, Michigan, the full manufacturer warranty on every detector and product registration support.
  • Help Before and After You Buy: Our staff answer setup, coil and relic detector questions by phone at (844) 771-0707 or by email.

Customer Questions & Expert Answers

Get real answers from outdoor explorers and our product experts. Browse questions about performance, features, and setup —or ask your own to make sure this gear fits your next adventure.

What is the best metal detector for relic hunting?

The best metal detector for relic hunting tells iron from good targets, separates targets that lie close together and holds a steady target ID in mineralized soil. These are the relic detectors we recommend, by level:

First relic detector: the Minelab VANQUISH 360 or Minelab VANQUISH 560, Multi-IQ multi-frequency and waterproof to 5 m (16 ft). The 560 adds Iron Bias and Ferrous Volume settings and a 12 x 9 inch coil. The Garrett ACE Apex adds Iron Audio with 8 Iron Volume levels.

Mid-range: the Nokta Legend 2, with recovery speed 1 to 10 and two coils in the box, and the Minelab EQUINOX 900, which also handles the beach.

Flagship: the XP DEUS II, fully wireless from 1.8 lb (0.82 kg) with the RC remote on the belt and the 9 inch coil, and the Minelab MANTICORE, with its 2D target ID map and custom ferrous limits.

Our Best Metal Detectors for Relic Hunting guide compares them in more depth.

Answered by Richard T. · April 2026

What is the best metal detector for coins and relics?

The best metal detector for coins and relics has accurate target ID, good separation in trash and iron control, because coins and relics turn up on the same old homesites, parks and fields. Our picks:

All-rounder: the Minelab EQUINOX 900, with Park, Field, Beach and Gold modes and a 6 inch coil for trashy spots.

Iron-heavy sites: the Minelab MANTICORE with its 2D target ID map, the XP DEUS II and the Nokta Legend 2.

On a budget: the Minelab VANQUISH 460, Garrett ACE Apex or Garrett ACE 400.

Our Best Metal Detectors for Coins guide covers coin settings and sites in detail.

Answered by John W. · November 2026

What metal detector is best for finding Civil War relics?

The best metal detector for Civil War relics handles dense iron, because camp sites are full of nails, fragments and hardware with buttons, buckles and bullets mixed in. Look for adjustable recovery speed, iron discrimination and iron audio before raw depth.

The XP DEUS II (Reactivity 0 to 5, Iron Volume 0 to 10) and the Minelab MANTICORE (2D target ID map, custom ferrous limits, recovery up to 8) give the most control on heavily hunted, iron-packed ground. The Nokta Legend 2 and Minelab EQUINOX 900 handle the same ground for less, and the Legend 2's 8 x 5.5 inch LD21 coil fits between iron. A pinpointer helps you recover small relics without damage.

Answered by Dan P. · April 2026

How deep do metal detectors find relics?

How deep a metal detector finds relics depends more on the target and the soil than on the detector: a large, high-conductive object reads deeper than a small button, and mineralized or iron-filled ground cuts depth on any machine.

To reach deeper relics, use a larger coil on open ground, a slower recovery speed where there is little iron, and good ground balance. The Minelab MANTICORE has sensitivity from 1 to 35, and the Nokta Legend 2 has a Relic mode built for deeper targets. For large, deep targets such as caches, a two-box detector like the XP XTREM Hunter or our deep seeking metal detectors reach further than a standard coil.

Answered by John W. · April 2026

Is a pinpointer useful for relic hunting?

Yes, a pinpointer is one of the most useful tools for relic hunting. Once the hole is open, it shows exactly where the target sits, so you dig less, keep the hole small and avoid cutting through fragile relics such as buttons, buckles and insignia with your digging tool.

The Garrett Pro-Pointer AT is waterproof to 6 m (20 ft) with an IP68 rating, so rain and wet holes are no problem, and DEUS II owners can pair the XP MI-6 over the XP DEUS II wireless link. See all our pinpointers.

Answered by Dan P. · April 2026

Is a multi-frequency metal detector better for relic hunting?

A multi-frequency metal detector is not required for relic hunting, but it helps on mineralized ground and wet soil, where it keeps target ID steadier than one fixed frequency. Detectors such as the Minelab VANQUISH 360 (Multi-IQ), Nokta Legend 2 (SMF) and XP DEUS II (FMF) transmit several frequencies at once, and the Legend 2 and DEUS II can also run single frequencies.

Single-frequency VLF detectors are still proven relic machines. The Garrett AT Max runs 13.6 kHz with Iron Audio in all modes, and the Minelab X-TERRA PRO lets you choose 5, 10 or 15 kHz on land (8 kHz in Beach mode): lower frequencies favor large, high-conductive relics, higher frequencies small, low-conductive ones. Compare all of them in our multi-frequency metal detectors.

Answered by Richard T. · November 2026

Still have a question?

Ask our detecting specialists. We answer most questions within one business day, and publish the useful ones here so other detectorists benefit too.

0 / 1200

Your question and our answer will be published on this page, shown with your first name.

Protected by reCAPTCHA. We only use your email to send you the answer.