Understanding XP Deus II Factory Programs
The
XP Deus II metal detector offers 12 specialized factory programs designed for different hunting conditions and target types. Unlike fixed multi-frequency detectors, the Deus II uses intelligent frequency combinations ranging from 4 kHz to 45 kHz, with program-specific signal processing optimized for each scenario.
Multi-Frequency Technology Overview
The Deus II's advantage lies in its adaptive frequency management:
-
Low to Medium Frequencies: 4-14 kHz combinations for deep detection
-
High Frequencies: Up to 24 kHz or 40 kHz for small target sensitivity
-
Frequency Subtraction: Removes electrically conductive soil interference
-
Frequency Addition: Enhances target range detection capabilities
Complete Factory Programs Breakdown
Program 1 - General
FMF - Max. freq. ~ 40kHz - Conductive Soil Subtraction
General uses low and high frequencies and gives an excellent assessment of targets in the soil. Perfect for both beginners and
experienced users, it offers excellent target discrimination while rejecting soil moisture that causes false signals.
Key Tips:
- Test effectiveness in soil, not air testing
- Set reactivity to 2 for clean soil, 3 for mineralized ground
- Excellent confidence on deep targets
Program 2 - Sensitive
FMF - Max. freq. ~ 40kHz - Frequency Addition
Sensitive maximizes detection capabilities using frequencies up to 40 kHz. Highly effective in mineralized and polluted ground when searching for small targets.
Optimization Settings:
- Narrow notch zone activated at frequencies 23-25
- Reactivity 2 for clean ground, 3 for challenging conditions
- Superior coke and humidity classification
Program 3 - Sensi FT (Sensitive Full Tones)
FMF - Max. freq. ~ 40kHz - Frequency Addition
Sensitive Full Tones builds on Program 2's platform but uses Full Tone audio mode with Reactivity at 3. Each target generates proportional tones based on conductivity, requiring more experience but providing rich audio feedback.
Program 4 - Fast
FMF - Max. freq. ~ 40kHz - Frequency Addition
Fast program uses Pitch audio mode with Reactivity 3, enabling rapid detection in ferrous-polluted and mineralized ground conditions.
Program 5 - Park
FMF - Max. freq. ~ 24kHz - Frequency Addition
Park program targets recreational areas like parks and dry sand beaches with built-in trash rejection:
- Active notch 23-36 rejects aluminum foil
- B.Caps set to 5 for rusty ferrous cap rejection
- Optimized for typical urban pollution
Program 6 - Deep HC (Deep High Conductor)
FMF - Max. freq. ~ 14kHz - Frequency Addition
Deep High Conductor combines low and medium frequencies up to 14kHz for maximum depth on good conductors like coin clusters while maintaining sensitivity to isolated targets.
Ground Settings:
- Ground stability set to 1 for maximum depth performance
- Adjust to stability 2 if experiencing false signals
- Use Ground Grabbing for optimal balance adjustment
Program 7 - Deus Mono
Monofrequency Adjustable from 4 to 45 kHz
Deus Mono operates on single frequency like the original Deus but with expanded range to 45 kHz and improved EMI rejection. Ideal for unstable multi-frequency environments.
Program 8 - Gold Field
FMF - Max. freq. ~ 40kHz - Frequency Addition
Gold Field targets highly mineralized gold-bearing ground where nuggets often appear as ground or ferrous signals:
- "All Metal" mode for maximum depth
- Regular Ground Grabbing adjustment required
- Use IAR Discrimination for surface ferrous rejection
- Increase Reactivity in strong mineralization
Pair this program with the
AlgoForce E1500 Plus High-Precision Gold Detector for complete gold prospecting setup.
Program 9 - Relic
FMF - Max. freq. ~ 24kHz - Frequency Subtraction
Relic program uses frequency subtraction for large mass detection with low reactivity settings:
- Sweep 15-20 cm above ground to avoid shallow interference
- Reduce Reactivity to 0 for maximum depth advantage
- Longer sounds indicate deep masses
Beach and Underwater Programs
Program 10 - Diving
FMF - Max. freq. ~ 14kHz - Conductive Soil Subtraction
Diving provides stability in saltwater environments using low and medium subtracted frequencies for valuable targets like rings and coins while reducing aluminum foil responses.
Program 11 - Beach
FMF - Max. freq. ~24kHz - Conductive Soil Subtraction
Beach increases sensitivity to small targets compared to Diving program:
- Maintain parallel sweeps without coil lifting
- Reduce Salt sensitivity if experiencing instability
- Activate B.Caps for rusty ferrous cap rejection
Program 12 - Beach Sens
FMF - Max. freq. ~ 40kHz - Conductive Soil Subtraction
Beach Sens offers maximum sensitivity up to 40kHz for smallest targets while maintaining deep target performance. Most reactive beach program requiring careful technique.
Essential Accessories for Deus II Success
To maximize your XP Deus II performance, equip yourself with quality accessories:
Maximizing Your Deus II Performance
To get the most from your XP Deus II factory programs:
Choosing the Right Program
Select programs based on your hunting environment:
-
General hunting: Programs 1-4
-
Parks and recreation areas: Program 5
-
Deep coin hunting: Program 6
-
Gold prospecting: Program 8
-
Relic hunting: Program 9
-
Beach and underwater: Programs 10-12
For those new to
metal detecting, start with Program 1 (General) and gradually experiment with specialized programs as you gain experience. Consider exploring our
beginner-friendly detectors if you're just starting out.
Advanced Deus II Configuration
Once you master the factory programs, explore advanced customization options available in our complete XP detector lineup. The Deus II's programmable nature allows infinite fine-tuning for specific conditions and target types.
