A Working Line, Not a Novelty Kit
The Professionals Choice range is built for people who go through this stuff rather than display it. Everything is manufactured in the United States, packaged in quantities that match how fast consumables actually disappear, and catalogued under TPC part numbers so reordering next season means matching a code instead of measuring something again. There is no premium tin, no branded case, and nothing in the line that exists to look good on a shelf.
What the Line Covers
Four groups, and most detectorists use at least two of them. Detail brushes in brass and nylon handle crusted dirt on digger blades, shovel edges, and scoop baskets, with the two bristle materials covering hard bare steel and softer coated surfaces respectively. Cotton wiping cloths do the drying and the pre-storage wipe-down that keeps sweat and salt off metal. The cleaner-lubricant-preservative lays the protective film that stops rust taking hold between hunts, and the bore cleaner is the dedicated solvent for heavier fouling. Alongside those sit the traditional firearm consumables — caliber-sized cotton patches, solid brass patch jags, and matching bore brushes — for anyone maintaining rifles and pistols with the same supplies.
The Specs Behind the Part Numbers
A few details are worth knowing before you order. The patches are 100% cotton and cut square to caliber rather than sold as a universal size, so the .270 Cal / 7mm patch is a 1½ by 1½ inch square. The rifle patch jags are solid brass with a spiked tip and cut with an 8/32 thread, the common thread on US cleaning rods, so they fit most rods you already own. Brushes come in brass and nylon across matching sizes, letting you pick bristle aggressiveness without leaving the line. The roll patch dispenser is carbon steel wire at 3¼ by 6½ inches and holds a 10-yard roll, sized for a bench rather than a pack.
Bulk Packs Are the Point
Patches and cloths come in counts that look excessive until you have used them for a season. Buying 500 or 1000 at a time drops the per-piece cost to a fraction of what small packs run, and consumables do not expire on a shelf — the cotton you buy this year works exactly as well next year. The same logic runs through the liquids: 4 oz bottles sized for regular use rather than showpiece packaging.
Where the Technique Lives
This page covers what the products are. For how to use them — the ten-minute routine after a wet or salty hunt, which bristle material belongs on which surface, and the list of things you should never put solvent on, including coils, screens, rubber grips, and connector pins — see cleaning and anti-corrosion care. If you are looking to clean recovered coins or relics rather than the tools that dug them, that is a different discipline with different risks, and the tumblers, media, and conservation tools for it are on the tumblers and cleaning supplies page.
The Gear This Protects
Most of what these supplies defend against is rust on the tools that live in a wet truck bed. If corrosion has already taken something, replacements are under shovels, diggers and picks and sand scoops and diving tools, where stainless and titanium hold up far better on saltwater beaches, with covers and storage gear under parts and accessories.
