Garrett 6.5 x 9 in Coil Cover for ACE 6.5x9 PROformance Concentric Coil

This 6x9 coil cover fits the stock elliptical search coil on Garrett ACE 150, 200, 250, 300, 350, and 400 metal detectors. The molded rubber design matches the 6 inch by 9 inch dimensions of the factory coil that ships with these ACE series models. Verify your coil measures 6 inches by 9 inches before ordering to ensure a snug fit. This cover is designed specifically for the standard 6x9 elliptical coil configuration that comes with ACE series detectors.

This 6x9 coil cover is designed to protect your Garrett ACE search coil from scratches and scuffs while you are in the field. The cover fits over the coil housing to shield it from abrasion during use. Made from molded rubber, it provides a protective barrier between the coil and the ground. The cover is sized to match the 6 inch by 9 inch dimensions of the stock ACE series coil. For best results, ensure the cover is properly seated on the coil housing before each hunt.

The 6x9 coil cover is made from molded rubber designed to fit over the stock elliptical search coil on Garrett ACE series metal detectors. The cover should be aligned with the coil housing and fitted over the 6 inch by 9 inch surface to provide protection from scratches and scuffs. Ensure the cover sits properly on the coil before use. The molded design is shaped to match the contours of the standard ACE series coil for a secure fit during field use.

The 6x9 coil cover provides abrasion protection, not waterproofing, for Garrett ACE search coils. It shields the coil housing from scratches and scuffs that can eventually compromise the factory waterproof seal, but it is not a submersion barrier itself. The cover's primary benefit is preserving the integrity of the existing housing seal by preventing cracks and deep scratches from rocky ground contact. This molded rubber cover is designed to protect the coil surface from physical damage during field use.

This 6x9 coil cover is made from molded rubber designed to protect your Garrett ACE search coil from scratches and scuffs while hunting in the field. The cover provides a protective barrier between the coil housing and abrasive surfaces like rocks, gravel, and rough ground. Inspect the cover regularly for signs of wear such as thin spots or tears, and replace it when the rubber no longer provides adequate protection. The cover is sized to fit the 6 inch by 9 inch stock coil on ACE series detectors.

This 6x9 coil cover is sized for the stock 6x9 elliptical coil that ships with Garrett ACE detectors. The cover matches the 6 inch by 9 inch dimensions of the factory coil housing. If you are running a different coil, measure the coil housing length and width and match it to the cover's stated dimensions before ordering. For help identifying compatible accessories, browse our metal detector parts and accessories collection.

The 6x9 coil cover is a practical gift for a new Garrett ACE owner who will be hunting rocky parks, construction sites, or gravel beaches where coil abrasion is a concern. It is an affordable wear item that extends the life of the stock coil and preserves resale value if the detectorist upgrades later. Pair it with a finds pouch or a pinpointer for a complete starter accessory set. For more budget-friendly detector accessories, see our holiday gifts under $20 collection.