Get real answers from outdoor explorers and our product experts. Browse questions about performance, features, and setup — or ask your own to make sure this gear fits your next adventure.
The Garrett MS-3 Z-Lynk Wireless Headphone Kit (part 1627720) turns a wired metal detector into a wireless one. A WT-1 transmitter plugs into your detector's headphone jack and sends the audio to MS-3 over-ear headphones with a Z-Lynk receiver built in. Garrett rates the audio delay at 17 milliseconds, which it describes as about six times faster than Bluetooth, so the tone you hear stays in step with your swing.
Who This Kit Is For, and Who Needs Only the Headphones
This kit is for detectorists whose detector has a wired headphone output: a standard 1/4 in jack, or the 2-pin connector on Garrett's AT series. Garrett designed the kit for "all types of metal detectors", so it is not limited to Garrett machines. It suits AT owners in particular, such as the Garrett AT Pro and AT Gold, because the 2-pin AT cable is in the box.
If your detector already has Z-Lynk wireless built in, you do not need the transmitter. The Garrett ACE Apex is one example: buy the MS-3 headphones on their own and pair them directly. The same applies to other Garrett models with Z-Lynk built in, such as the AT Max, the Axiom and the Vortex series.
Key Features
- 17 ms audio delay. Faint and broken signals reach your ears as the coil passes the target, not a beat later, which matters when you are listening for small or deep targets.
- Up to 30 hours per charge. Garrett rates both the MS-3 headphones and the WT-1 transmitter for up to 30 hours, which covers several full days of hunting between charges. A full recharge takes about 5 hours from a standard USB port.
- Volume control on the headphones. Adjust the level at your ear without reaching for the control box.
- Two cables for two connector types. One cable fits a 1/4 in headphone jack, the other fits Garrett's 2-pin AT connector, so one kit can move between detectors.
- No cord to snag. Nothing runs from the detector to your head, so brush, pack straps and digging tools never catch on a headphone cable.
- Over-ear, foldable headphones. Full-ear cushions block wind and traffic noise, and the headband folds for a pack.
What Is in the Box
- Garrett MS-3 Z-Lynk wireless headphones with built-in receiver and volume control
- Garrett WT-1 Z-Lynk wireless transmitter
- 1/4 in audio cable
- 2-pin AT audio cable
- Two USB charging cables
- Two mounting bands
A USB wall charger is not included. Any standard USB port charges both units.
Compatibility
- Detectors with a 1/4 in headphone jack: use the 1/4 in audio cable between the jack and the WT-1.
- Garrett AT detectors with the 2-pin headphone connector: use the 2-pin AT audio cable. Garrett's Z-Lynk guide notes that the 2-pin cable is required for its All Terrain detectors.
- Garrett detectors with Z-Lynk built in: the MS-3 headphones pair directly and the WT-1 is not needed.
- Other Z-Lynk gear: the MS-3 headphones also pair with Garrett's Pro-Pointer AT Z-Lynk pinpointer. See our Garrett pinpointers.
Where It Works Well and Where It Does Not
The kit is built for land hunting in any weather short of submersion. Garrett rates the WT-1 transmitter IP64, protected against heavy rain, and the MS-3 headphones IP52, protected against light rain. Neither piece should ever go underwater, so the kit is not for wading, snorkeling or diving. For water hunting, look at the waterproof wired options in our metal detector headphones collection.
How the Kit Differs From Other Garrett Wireless Options
- MS-3 headphones alone: the same headphones without the WT-1 transmitter or cables. This is the right choice if your detector has Z-Lynk built in.
- Z-Lynk 1/4 in headphone kit: a WT-1 transmitter plus a WR-1 receiver, for detectorists who want to keep their own wired headphones and make them wireless.
- Pro-Pointer AT Z-Lynk with MS-3 kit: adds Garrett's wireless pinpointer, so you hear the pinpointer through the same headphones as the detector.
Warranty
Garrett's Z-Lynk user guide lists a 24-month limited parts and labor warranty for the Z-Lynk wireless system. Serious Detecting is an authorized Garrett dealer.
Customer Questions & Expert Answers
Customer Reviews & Field Feedback
See what real detectorists and prospectors are saying. Read authentic experiences from the field, discover what users love most, and learn how this product performs in real-world conditions. Share your own review to help fellow explorers choose with confidence.
Recently Viewed Gear
Last products you explored