Get real answers from outdoor explorers and our product experts. Browse questions about performance, features, and setup — or ask your own to make sure this gear fits your next adventure.
Detector specifications
Best for
Highlighted icons show the targets, ground and experience level this detector is built for.
- Coin & Relic — shop all
- Gold — not suited to this detector
- Beach & Water — not suited to this detector
- Kids — not suited to this detector
- Beginner / Intermediate — not suited to this detector
- Advanced / Expert — shop all
The OKM eXp 5500 Professional is OKM's multi-sensor 3D ground scanning system with three operating modes: 3D Ground Scan, Magnetometer and VLF Metal Detection. Its PentaSense system lets you run the Super Sensor alone or add Enhancer modules to scan a wider lane, an 8.4 inch touchscreen control unit runs the survey, and Visualizer 3D Studio Professional Edition on the included Windows notebook handles the analysis afterward. OKM lists archaeology, treasure hunting and cavity detection as its uses, with artifacts, militaria, treasure chests, cavities, tunnels and jewelry among the targets.
| Configuration | |
|---|---|
| Control unit | eXp 5500 control unit with 8.4 in touchscreen and replaceable Li-ion battery |
| Sensors | Super Sensor with LED Orbit, four Enhancers, PentaSense Rod |
| Search coil | 14 x 10 in PentaCoil (VLF) |
| Operating modes | 3D Ground Scan, Magnetometer, VLF Metal Detection |
| Software | Visualizer 3D Studio Professional Edition on the pre-configured Windows notebook |
What is in the box with the OKM eXp 5500
OKM's standard contents for the eXp 5500 Professional
- eXp 5500 control unit
- Super Sensor with LED Orbit
- Four Enhancers (sensor modules for the PentaSense system)
- PentaSense Rod
- 14 x 10 inch PentaCoil VLF search coil
- Telescopic rod
- Carrying strap
- Backstrap
- Four protective caps
- Bluetooth headphones with charging cable
- USB flash drive with OKM Visualizer 3D Studio Professional Edition
- Pre-configured Windows notebook
- Charger with USB-C charging cable
- Power pack PP20V3A01
- Waterproof and shock-resistant protector case
PentaSense: one, three or five sensors
OKM describes PentaSense as a multi-sensor system whose 10 sensors do the work of five Super Sensors side by side, for high-resolution measurements over a wide scan field. The four interchangeable Enhancers plug into any of the four sockets on the Super Sensor, so you can scan with one, three or five sensor positions depending on the ground. With all four fitted, the system covers the lane of five Super Sensors in a single pass. The PentaSense Rod lets you balance the probe in front of you, even on a slope, and keeps it at a steady distance from your body while you walk.
VLF metal detection on the eXp 5500
The PentaCoil runs Very Low Frequency (VLF) detection for metal in shallow soil. The coil sends an electromagnetic field into the ground, buried metal responds with its own field, and the eXp 5500 picks that up. OKM reports that customers have found objects down to 25 m (82 ft) with the eXp 5500's technology; we treat that as a best case for large objects and structures, not a depth for coins.
Who the OKM eXp 5500 suits
We see the eXp 5500 as an advanced OKM investigation platform for customers running more involved underground investigations. It combines several sensing methods with detailed post-scan analysis on a Windows notebook.
Several ways to collect information
Picture a historical site where both buried metal objects and subsurface structures may be present. The eXp 5500 offers 3D Ground Scan, Magnetometer and VLF Metal Detection, and different sensors respond to different physical properties. More sensors give you more ways to look at a spot. They do not guarantee a correct identification.
VLF metal detection: the VLF coil handles conventional metal detection near the surface, which is useful on ground with a lot of shallow metal. We would not describe the VLF system and the 3D scanning system as interchangeable; they answer different questions.
Reading the scans after you leave the site
We particularly like that scan data goes home with you and can be examined in OKM's Visualizer 3D Studio software. Interpreting that data takes training. A convincing image is not necessarily an accurate representation of what is underground, so repeat scans of the same area are worth the time.
One mistake to avoid with the eXp 5500
Assuming the system can identify gold with certainty from the color or shape of a 3D image. A graphical anomaly alone cannot establish what an object is made of.
Our recommendation on the OKM eXp 5500
We recommend the eXp 5500 to customers who want a more advanced OKM platform. Its strongest point is the combination of multiple sensing methods with detailed analysis after the scan.
Permission and protected sites
We would get the landowner's permission before any survey and check the laws that protect historic sites, archaeological sites and burials where you plan to scan. A ground scanner can show where something is different underground; it does not tell you whether you may dig there.
OKM eXp 5500 specifications
| Specification | OKM eXp 5500 Professional |
|---|---|
| Operating modes | 3D Ground Scan, Magnetometer, VLF Metal Detection |
| Control unit | 75 x 210 x 230 mm (3 x 8.3 x 9.1 in), approx. 1.7 kg (3.7 lb) |
| Display | 8.4 in, 1024 x 768 pixels, IPS touchscreen |
| Processors | Quad-core ARM Cortex-A53 at 1.6 GHz main, plus companion processors |
| Memory | 2 GB RAM, 8 GB eMMC data memory |
| Battery | Li-ion, replaceable, 7.27 V, 10.2 Ah, 74 Wh |
| Operating time | Approx. 7 h fully charged at 25 °C (77 °F), medium brightness |
| Charging time | Approx. 3 h at 10 to 30 °C (50 to 86 °F) |
| Power input | 12 V DC, 3 A max. |
| Data and audio | USB-C; built-in speakers or Bluetooth headphones |
| Super Sensor | 1010 x 200 x 110 mm (39.8 x 7.9 x 4.3 in), 0.74 kg (26.1 oz), 180 cm (70 in) cable, SCMI-15-D |
| Enhancer | 355 mm (14 in) long, 45 mm (1.8 in) diameter, approx. 0.1 kg (3.5 oz), SCMI-15-D |
| PentaCoil | 345 x 265 x 70 mm (13.6 x 10.4 x 2.8 in), 0.84 kg (1.9 lb), 1.8 m (70 in) cable, VLF |
| PentaSense Rod | 920 mm (36 in) closed, 1520 mm (60 in) extended, 2.76 kg (6.1 lb) |
| Temperature | Operating minus 10 to 50 °C (14 to 122 °F); storage minus 20 to 60 °C (minus 4 to 140 °F) |
| Air humidity | 5 to 75% |
| Protection | IP40; not waterproof |
| Warranty | 2 years |
OKM covers the eXp 5500 with a 2-year warranty. Serious Detecting is an authorized OKM dealer, and we can help you set up the notebook and software before your first survey.
Every OKM detector and ground scanner we carry is in our OKM collection, and our 3D imaging metal detectors collection compares ground scanners across brands.
Customer Questions & Expert Answers
Customer Reviews & Field Feedback
See what real detectorists and prospectors are saying. Read authentic experiences from the field, discover what users love most, and learn how this product performs in real-world conditions. Share your own review to help fellow explorers choose with confidence.
Recently Viewed Gear
Last products you explored