Quest Scuba Tector Pro Metal Detector

The Quest Scuba Tector Pro is a pulse induction underwater metal detector rated to 200 feet (60 meters), built for divers and shallow water hunters who need clean signals where ordinary detectors fall apart. Its 95 kHz PI circuit stays quiet in saltwater and black sand, its open face STP20 search head sweeps wide like a small detector instead of sniffing like a pinpointer, and the whole unit folds on a 180 degree hinge to about 10 inches for the dive bag. An OLED display, audio, vibration, and LED alerts, and a Motion Control Diving Mode round out the most capable Scuba Tector Quest has built.

A Real Search Head, Not Just a Probe Tip

Most underwater pinpointers make you inspect the bottom a few inches at a time. The Scuba Tector Pro's STP20 open face head covers real ground with controlled sweeps through sand, silt, and tight spots between rocks, and Quest offers interchangeable coil options: a round head for wide scanning and a narrow head for cramped spaces. Salt stable pulse induction ignores the mineralization that forces VLF units into constant retuning, so wreck sites, tidal zones, and black sand beaches produce target signals instead of chatter. When a target sounds off, you choose how to hear it: buzzer audio for murky rivers, vibration for clear water where you want to save your air and attention, LED indication for the space between. At depth, where water pressure can fight physical buttons, the Motion Control Diving Mode keeps the detector fully usable, and the OLED screen gives simple status feedback on battery, sensitivity, and alarm mode at a glance. Topside, the included rod adaptor converts the Pro into a compact beach and surf detector, while the anchor ring tethers it safely to your rig underwater.

What's in the Box

• Scuba Tector Pro detector body with folding 180 degree hinge and sealed USB-C charging cap
• STP20 open face search head
• Anchor ring for tethering the detector while diving
• Rod adaptor to run the Pro as a compact beach and shallow water detector
• USB-C charging cable
• Spare O-rings and mounting hardware
• Mesh carry pouch that drains and dries fast after saltwater sessions
• Lanyard 

Scuba Tector Pro Performance Features

• 95 kHz pulse induction circuit, stable in saltwater, freshwater, and mineralized black sand
• Waterproof to 200 ft (60 m) with sealed housing and dual O-ring protection
• Open face STP20 search head with 180 degree adjustable hinge and interchangeable coil options
• OLED display for battery, mode, and sensitivity status feedback
• Three alert types: buzzer audio, vibration, and LED indication
• Motion Control Diving Mode keeps you in command when pressure affects buttons at depth
• Adjustable sensitivity and alarm behavior from a simple two button interface
• Loss alert and battery life indicator help the detector come home from every dive
• Folds to roughly 10 inches (25 cm) and weighs well under a pound
• Built in Li-Po battery with USB-C charging and 10 to 14 hours per charge

Scuba Tector Pro at a Glance

• Technology: 95 kHz pulse induction
• Waterproof rating: 200 ft (60 m)
• Search head: 10x3.5" STP20 open face, folds 180 degrees, interchangeable coil options
• Display: OLED status screen
• Alerts: audio, vibration, and LED
• Control at depth: Motion Control Diving Mode
• Beach conversion: rod adaptor included
• Charging: USB-C
• Packed length: about 10" folded

Why Buy from Serious Detecting

Serious Detecting is an authorized Quest dealer, so your Scuba Tector Pro is genuine and ships with Quest's manufacturer warranty and technical support access. Browse the full Quest metal detectors collection, see every Quest pinpointer side by side, gear up with scoops and diving tools, or compare across brands in our complete metal detectors lineup.

Questions about the Scuba Tector Pro or help choosing your underwater setup? The detecting experts at Serious Detecting are here before and after your purchase.