A pulse induction metal detector, also called a PI detector or pulse metal detector, sends short, powerful pulses into the ground and reads the signal that fades after each one. A PI metal detector, or PI gold detector in the goldfields, is the tool for nuggets in hot ground, deep relics and saltwater beaches, where a VLF loses depth.
Military Discount: Active or retired U.S. military may be eligible for 15% off select Minelab and Garrett detectors. See Military Discount Metal Detectors for details.
Open Box: Metal detectors with damaged or opened packaging, offered at a reduced price. Full manufacturer’s warranty included. Questions about a specific unit? Call us. See Open Box Metal Detectors.
Promotional banner with a torn yellow paper effect revealing the words 'BLACK FRIDAY' on the left, and large white text on a dark textured background reading '$2000 PRICE DROP! No actual product is shown.
Promotional banner with a torn yellow paper effect revealing the words 'BLACK FRIDAY' on the left, and large white text on a dark textured background reading '$2000 PRICE DROP! No actual product is shown.
Promotional banner with a torn yellow paper effect revealing the words 'BLACK FRIDAY' on the left, and large white text on a dark textured background reading '$2000 PRICE DROP! No actual product is shown.
Pulse induction works differently from the VLF detectors most hobbyists start with. Rather than transmitting a continuous signal, a PI detector sends short, powerful bursts of current into the ground and measures the decaying magnetic field each burst leaves behind. Ground minerals have far less effect on that measurement, so a PI stays stable over the iron-rich soil, hot rocks, black sand and saltwater that make VLF machines chatter and lose depth. The payoff is depth and stability in harsh ground. The trade-off is discrimination: PI detectors do not separate trash from good targets as precisely as a VLF, so you dig more targets. For deep gold, relics and even meteorites in hot ground, most prospectors accept that.
Why Pulse Induction Wins on Gold & Saltwater
Two situations make a PI worth its premium. The first is gold in mineralized ground: the goldfields where nuggets hide are often the hot soils that push a VLF to its limits, and a pulse induction gold detector keeps running quietly and deep there. The second is saltwater and black-sand beaches, where wet salt and magnetic sand make other detectors false and need constant adjustment, while a PI handles them with far fewer false signals. If you prospect mineralized goldfields or hunt the surf, a pulse induction detector is the right tool for the job.
Pulse Induction Detectors Compared
Our pulse induction detectors start with the Garrett Axiom and Axiom Lite and run through the Minelab GPX 6000 and waterproof SDC 2300, the AlgoForce E1500 Plus, the Nokta Magnetar 9000 and the Fisher Impulse AQ, plus PI scuba detectors and pinpointers. Compare our pulse induction (PI) metal detectors by technology, waterproofing and weight. The last two rows are Minelab's ZVT detectors, which are not pulse induction; prospectors weigh them against the same PI machines, so they are listed here.
Detector, coil and WM 14 to 1 m (3.3 ft) for up to 30 minutes
6.1 lb (2.78 kg) with Z18 coil
Professional prospectors
Choosing a Pulse Induction Detector
Match the machine to your ground, your budget and how wet you will get. For long days of gold prospecting, carry weight matters most, so start with the Garrett Axiom or AlgoForce E1500 Plus and add a search coil sized for your patch: a small coil for tiny gold between rocks, a large one for ground coverage. For creeks, surf and beaches, let the waterproofing column narrow the field, because several PI control boxes are rainproof only and must stay above the water.
For deep caches and voids, the Groundtech A2 Series pairs a 3D ground scanner with a 500 Hz PI detector rated for depths up to 1.5 m (5 ft), and the Groundtech GR-4 DUAL adds a 404 Hz PI detector rated for depths up to 3 m (10 ft) to its scanner. To shop by budget, use the price links above the products.
Pulse Induction vs. VLF vs. Multi-Frequency
Each technology has its own job. Single-frequency VLF costs less and discriminates trash well, which suits general coin and relic hunting on mild ground. Simultaneous multi-frequency is the all-rounder, strong on saltwater beaches and variable soil with good target ID. Pulse induction goes deep in the worst ground and suits gold and the surf, trading away fine discrimination. Our guide on choosing between PI and VLF walks through the decision in detail.
Why Buy Your Pulse Induction Detector from Serious Detecting?
Free Shipping on Orders Over $99: Your pulse induction detector ships at no extra cost across the continental US.
Authorized Dealer for Every Brand We Carry: Showroom and local pickup in Ypsilanti, Michigan, the full manufacturer warranty on every detector and product registration support.
Help Before and After You Buy: Our staff answer setup, coil and pulse induction questions by phone at (844) 771-0707 or by email.
Customer Questions & Expert Answers
Get real answers from outdoor explorers and our product experts. Browse questions about performance, features, and setup —or ask your own to make sure this gear fits your next adventure.
What is a pulse induction metal detector and who needs one?
A pulse induction metal detector sends short pulses into the ground and measures how the response decays, instead of transmitting continuously like a VLF, and ground mineralization has much less effect on that reading. You need one when mineralized ground defeats a VLF: goldfields where iron-rich soil causes constant false signals and depth loss, and black sand beaches and rough salt surf.
For parks, coins and mild ground, a VLF or a simultaneous multi-frequency detector does the job at lower cost and with better target ID. If gold is the goal, compare PI with the other technologies in our gold detectors collection.
Answered by
Dan P.
· April 2026
What is the best pulse induction metal detector for gold?
For most prospectors chasing deeper nuggets, the best pulse induction metal detector for gold is the Minelab GPX 6000: GeoSense-PI with automatic ground balance that adapts to changing soil. The Garrett Axiom suits trashy goldfields, because its Iron Check helps flag iron with the DD coil, and the Garrett Axiom Lite shares the Axiom detector platform and ships with the 11 x 7 inch mono coil. For small gold in creeks and wet ground, the waterproof Minelab SDC 2300 is the pick.
All of them earn their cost in mineralized ground where a VLF misses targets. Our Best Metal Detector for Gold guide compares them with VLF and ZVT gold detectors.
Answered by
John W.
· April 2026
Can a pulse induction detector be used on the beach?
Yes, a pulse induction detector can be used on the beach, and PI machines are at their best in heavy black sand and rough salt surf, because salt and mineralization that cause false signals on many other detectors affect them much less. The trade-off is limited discrimination, so you will dig more trash.
For most recreational beach hunters, a waterproof multi-frequency machine like the Minelab EQUINOX 900 handles wet salt sand well and discriminates far better than a PI. A PI earns its place on the hardest beaches. The Fisher Impulse AQ is a waterproof PI built for beach, surf and shallow water, with a Volcanic Sand mode for black sand. Compare more options in our beach metal detectors collection.
Answered by
Richard T.
· April 2026
Does a pulse induction metal detector have discrimination?
Pulse induction metal detectors have limited discrimination compared to VLF machines. Most PI gold detectors run best in all-metal mode for maximum sensitivity rather than with discrimination notches. Some give you help: the Garrett Axiom has Iron Check on its DD coils, and the AlgoForce E1500 Plus shows a 0 to 99 conductive target ID when you pinpoint a target. Neither sorts trash from good targets as finely as a VLF or multi-frequency machine on trash-heavy coin and relic sites.
That is the main trade-off of PI technology: more depth in bad ground for less discrimination. For relic and coin hunting, a VLF or multi-frequency machine is usually the better choice; see our relic detectors.
Answered by
Richard T.
· April 2026
How is ZVT different from pulse induction?
ZVT, Minelab's Zero Voltage Transmission, is a separate technology from pulse induction. Minelab says ZVT uses ultra-constant, high-power magnetic fields and rates it at up to 40 percent more depth than traditional PI detectors. The Minelab GPZ 7000 runs ZVT and has built-in GPS. The Minelab GPZ 8000 runs GeoZVT, which Minelab describes as ZVT depth with advanced signal control for mineralized, conductive and EMI-heavy ground.
Both sit in our pulse induction collection because prospectors compare them with PI detectors such as the Minelab GPX 6000. GPZ 7000 and GPZ 8000 coils are not interchangeable, so pick the detector first and the coils second.
Answered by
John W.
· November 2026
What is the cheapest pulse induction metal detector?
The Garrett Axiom, Minelab SDC 2300 and Nokta Magnetar 9000 fall in the $3,000 to $5,000 band, and the Minelab GPX 6000 costs over $5,000. Not sure which band fits your ground? Ask us before you order.
Answered by
Dan P.
· November 2026
Can I use a pulse induction detector underwater?
Yes, you can use a pulse induction detector underwater if the whole detector is rated for it. Among our ground-search PI detectors, the Minelab SDC 2300 is waterproof to 3 m (10 ft), the Nokta Magnetar 9000 is IP68 to 3 m (10 ft) and the Fisher Impulse AQ is waterproof to 1 m (3 ft). The Garrett Axiom and Minelab GPX 6000 have waterproof coils, but their control boxes must stay out of the water. On the Magnetar, the Bluetooth headphones are not waterproof, so switch to waterproof headphones before you submerge it.