What Is a VLF Metal Detector?
A VLF (Very Low Frequency) metal detector transmits one continuous frequency into the ground and reads the response with a receive coil. Because the signal is continuous, the machine can measure the phase shift a buried target causes, and that phase shift is what gives VLF detectors their defining strengths: accurate target ID, adjustable discrimination, and the ability to tell a silver coin from a pull tab before you dig. Single-frequency VLF is the technology in most detectors sold today, from $150 starters to pro-level relic machines. For the physics in plain English, see our metal detector technologies guide.
What VLF Detectors Do Better Than Anything Else
Three things, and they matter on most ground in America. Separation: a fast VLF picks one good target out of a nail bed where slower machines hear a single smear. Discrimination: phase-based target ID means you skip the foil and dig the dimes. Efficiency: VLF machines are the lightest, cheapest, and most battery-frugal category, with the gentlest learning curve. On dry inland ground, parks, yards, fields, ghost towns, a good VLF gives up almost nothing to detectors costing three times as much, and the frequency itself tunes the machine to its job: lower frequencies (3 to 8 kHz) punch deeper on coin-sized conductors, while higher frequencies (13 kHz and up) light up small targets like fine jewelry, hammered coins, and gold.
VLF vs. Multi-Frequency
A multi-frequency machine runs several frequencies simultaneously, which buys stability on wet salt sand and variable ground, conditions that make a single-frequency VLF chatter. The trade: multi-frequency costs more and rarely separates targets in dense trash as cleanly as a fast single-frequency machine. Inland detecting on normal ground, VLF is the better value; on the beach or in changing soil, step up to multi-frequency. Plenty of serious detectorists own one of each and choose by site.
VLF vs. Pulse Induction
Pulse induction ignores ground mineralization almost entirely, which makes it the depth king in black sand, salt surf, and hot goldfield soil, exactly where a VLF struggles to ground balance. What PI gives up is discrimination: you dig everything. If your ground is mild enough for a VLF to run quiet, the VLF finds more good targets per hour; if the ground shuts your VLF down, no setting fixes physics, go pulse induction. Our guide on choosing between PI and VLF walks the decision in detail.
VLF Detectors for Gold
High-frequency VLF machines, the Fisher Gold Bug 2 at 71 kHz, the Minelab Gold Monster 1000 at 45 kHz, are the standard for sub-gram nuggets in mild to moderate ground, and they out-hit a PI on the smallest gold. They also give you target ID that PI can't, which matters on trashy tailings. For the full lineup of nugget machines, VLF and PI both, head to the gold detector collection.
How to Choose a VLF Detector
Pick by where you hunt:
- Parks, yards & coins: A mid-frequency (5 to 15 kHz) machine with solid target ID. This is where beginner-friendly VLF detectors shine, and where most detectorists should start.
- Relics & trashy sites: Prioritize recovery speed and adjustable discrimination; pair with a small search coil for nail beds.
- Gold country: High-frequency VLF (40 kHz+) for small nuggets in mild ground; see VLF for gold above.
- Salt beaches & hot ground: Don't force a VLF. Multi-frequency or PI is the right tool.
Why Buy a VLF Detector from Serious Detecting
Serious Detecting is an authorized US dealer for Garrett, Fisher, Nokta, Minelab, XP, and every other brand on this page, real factory warranties, not gray-market machines. Orders over $99 ship free out of Michigan, local pickup is open, and the staff hunts: we've swung these detectors in trashy parks, plowed relic fields, and gold country, and we'll tell you which machine fits your ground before you spend a dime. Call before you buy, you'll get a detectorist, not a call center.
