Skip to Product Info
    • The Falcon Gold Tracker MD20 with accessories shown on a white background.
    • The Falcon Gold Tracker MD20 with holster, handle, manual and connection wire are shown on a white background.
    • The Falcon Gold Tracker MD20, holster and probe, are shown against a white backdrop.
    • The Falcon Gold Tracker MD20 with holster and fully extended probe is shown against a white background.
    • The Falcon Gold Tracker MD20 main unit and probe are shown secured in the device's holster.
    • The Falcon Gold Tracker MD20 main unit is shown secured in the device's holster.
    • A side view of the three piece handle of the Falcon Gold Tracker MD20.
    • The holster of the Falcon Gold Tracker MD20 is shown open against a white backdrop.
    • Falcon MD20 Gold Tracker with warranty and documentation.
    Sale!

    Falcon MD20 Gold Tracker with 3-Piece Handle & Belt Holster

    Vendor:Falcon Type:Metal Detectors
    SKU: MD20 B02
    Sale Price $385.95 Regular Price $494.72
    22% Off

    Hurry up! Only 4 left

    4.9 from 3,100+ verified reviews · 4.8 on Google
    • Authorized U.S. dealer Genuine Falcon, full manufacturer warranty.
    • Free shipping, ships today Order by 3 PM ET Mon to Fri, noon ET Sat. Contiguous U.S.
    • 30-day free returns Prepaid return label included.
    • Talk to a detectorist (844) 771-0707, Mon to Fri, 10 AM to 4 PM ET.

    Found it lower at an authorized U.S. dealer? We'll match it.

    Payment & Security

    Your payment is secure. We don’t store or see your card details.

    • Amazon
    • American Express
    • Apple Pay
    • Bizum
    • Diners Club
    • Discover
    • Google Pay
    • Mastercard
    • PayPal
    • Satispay
    • Shop Pay
    • USDC
    • Visa

    Best for

    Highlighted icons show the targets, ground and experience level this detector is built for.

    The Falcon MD20 Gold Tracker is a probe-style metal detector designed to find gold, even extremely small pieces, in rock, crevices and concentrates. It runs at 300 kHz, has a waterproof probe on a 5 foot cable and an adjustable copper sensitivity ring, weighs 12 oz, and gets 40 to 50 hours from two 9 volt alkaline batteries. The bundle adds the Falcon 3-piece handle and belt holster.

    Configuration
    Detector Falcon MD20 Gold Tracker, 300 kHz all metal motion detector
    Probe Waterproof probe with copper sensitivity ring on a 5 ft cable
    Power Two 9 V alkaline batteries, 40 to 50 hours
    Added in this bundle 3-piece handle, Belt holster
    Falcon MD20 Gold Tracker metal detector resting on a rock

    What is in the box with the Falcon MD20 bundle

    Falcon's standard contents for the MD20 Gold Tracker

    • Falcon MD20 Gold Tracker control box
    • Waterproof probe with copper sensitivity ring on a 5 foot cable

    This Falcon MD20 bundle also includes

    How the Falcon MD20 works

    Falcon calls the MD20 an all metal motion detector. It responds to all metals and does not discriminate between them, but it gives separate responses to metal and mineral. Push the probe toward a signal and pull it away: a positive response (the signal follows the target) means metal such as gold, silver or copper, and a negative response (the signal moves away) means mineral such as iron oxides or black sand. Falcon names gold, silver, copper and platinum among the valuable metals it finds in rock formations. Because it is a motion detector, move the probe slowly over the target.

    The probe is a shielded search coil, much smaller and lighter than a conventional coil, and very sensitive to tiny objects such as placer gold, small nuggets and pockets of black sand. The larger the target, the deeper the Falcon finds it. Falcon describes the MD20 as small enough to fit in a pocket and rugged enough for field use.

    Copper ring: Normal and Enhanced Sensitivity

    Behind the black band is Normal Mode, more stable and easier to set; Falcon recommends it for pinpointing coins, jewelry and relics without touching or scratching them. Moved forward to the rear edge of the red band is Enhanced Sensitivity Mode, generally preferred for tiny specks of gold; expect more interference there. Moving the ring past the red band makes the unit unstable and sound continuously.

    Beyond prospecting

    Falcon designed the MD20 with the gold prospector in mind and lists other uses where small pieces of metal need to be found:

    • Hobby: pinpointing coins and jewelry without touching them
    • Medical: locating metal fragments in the body
    • Construction: locating covered nail heads
    • Food service: scanning for metal fragments
    • Woodworking: finding metal before it damages a blade

    The accessories in this bundle

    3-piece handle: the probe cable threads up through the handle, which lets you search standing up. We like it for working under rocks and brush, or in a cold stream, without reaching in by hand.

    Belt holster: the control box rides at your hip on a belt loop, so one hand stays free for the probe and you can adjust ground balance and sensitivity without holding the box.

    Who the Falcon MD20 suits

    What we appreciate about the Falcon MD20 is that it solves a very specific prospecting problem. Some gold is extremely small: tiny particles in rock, in crevices or mixed into concentrated material. The MD20 investigates those targets with a compact probe on a cable, at 300 kHz, a very high operating frequency that gives it strong sensitivity to tiny metal particles.

    Where the probe earns its keep

    Picture a bedrock crevice too narrow for a search coil. The Falcon probe goes into the crack and checks it inch by inch. The same goes for a piece of quartz with suspected fine inclusions: you can check small areas of the specimen one at a time. It responds to metal; it does not tell you whether a response is definitely gold.

    Settings that matter on the Falcon MD20

    Copper sensitivity ring: the probe has an adjustable copper ring that changes its sensitivity. We would spend time learning how the ring affects response and stability before heading out.

    Ground balance and sensitivity: picture checking concentrates heavy with black sand. Mineralization can produce responses, and correct adjustment helps you separate some mineral responses from metal. It does not identify the metal.

    Where the Falcon MD20 is the wrong tool

    For a large field of buried nuggets, a conventional gold detector covers ground far more efficiently; see our gold detectors. The Falcon is for detailed, close investigation.

    Mistakes to avoid with the Falcon MD20

    Assuming the MD20 identifies gold. It responds to other metals as well. The other is assuming the waterproof probe means the whole unit is waterproof; keep the control box dry.

    Our recommendation on the Falcon MD20

    We recommend the Falcon MD20 to prospectors working tiny gold particles, mineral specimens and confined spots. Its strongest point is extremely localized detection of small metal particles with a high frequency probe.

    Setting up the Falcon MD20

    Falcon's setup is short: turn the Ground Balance knob to the 1 o'clock position, set the copper ring for the mode you want, switch on with the Sensitivity knob and turn it to 1 o'clock. With no metal near the probe tip, advance Ground Balance until the alert sounds, then back it off until it stops. Raise Sensitivity until the unit barely hums. Give it 1 to 2 minutes to warm up and repeat those two steps. A higher sensitivity setting brings more false signals.

    Looking after the MD20

    • The probe and its 5 foot cable are waterproof; the electronics box is not, so never put it in water.
    • Do not dig with the probe tip; it can damage the unit and detune the probe.
    • Store the cable without kinks, with a bend radius of at least 6 inches.
    • Keep the detector out of direct sun and extreme heat, such as a vehicle dashboard.
    • Use two 9 volt alkaline batteries and replace both together; one drives the sensing electronics and the other the audio. Remove them for long storage.

    Falcon MD20 specifications

    Specification Falcon MD20 Gold Tracker
    Type All metal motion detector
    Operating frequency 300 kHz
    Dimensions 1.75 x 3.25 x 5.5 in
    Weight 12 oz
    Probe Waterproof probe with copper sensitivity ring on a 5 ft cable
    Batteries Two 9 V alkaline
    Battery life 40 to 50 hours
    Target alert Built-in speaker and headphone jack (speaker off with headphones)
    Controls Ground balance (automatic), sensitivity
    Modes (copper ring) Normal (black band), Enhanced Sensitivity (red band)

    Falcon's warranty terms are on the warranty card, and the warranty has to be registered with Falcon to be valid. Serious Detecting is an authorized Falcon dealer, and our staff can help with setup questions by phone or email.

    Every MD20 package and accessory we carry is in our Falcon MD20 collection, and the rest of the brand is in our Falcon collection.

    Product Specifications
    Specification Name Specification Value
    Detection
    Detector Type Gold Prospecting Detectors
    Skill Level Beginner / Intermediate
    Detection Technology Beat Frequency Oscillation (BFO)
    Frequencies 300 kHz
    Frequency Type Single
    Search Modes Normal and Enhanced Sensitivity
    Number of Search Modes 2
    All Metal Mode Yes
    Discrimination None
    Sensitivity Adjustable
    Ground Balance Manual
    Controls & Audio
    Audio Output Built-in Speaker and Wired Headphones
    Interchangeable Headphones Yes
    Wireless Audio None
    Coil
    Coil Connection Wired
    Waterproofing
    Water Resistance Waterproof Coil
    Power
    Battery Type 9V Alkaline
    Battery Quantity 2
    Battery Life 40-50 hours
    Rechargeable No
    Box & Warranty
    Warranty 5 Years
    Service & Support

    Warranty & Product Assurance

    At Serious Detecting, we stand behind the quality of every product we offer. Warranty coverage is provided directly by the manufacturer and may vary depending on the item. We’re here to help you understand your coverage and assist with the warranty process when needed. If you ever have questions or need support navigating a warranty claim, our team is happy to guide you.

    Technical Support & Expert Guidance

    Whether you’re setting up new gear, optimizing performance, or troubleshooting an issue in the field, our knowledgeable support team is here to help. We use this equipment ourselves, so we can offer real-world tips and step-by-step assistance to get you detecting with confidence. Message us anytime and we’ll do our best to get you pointed in the right direction fast.

    Manuals, Resources & Downloads

    Access user manuals, setup guides, safety tips, and technical documentation in our online support center. These resources help you understand your equipment, learn recommended settings, and get the most out of every hunt.

    Replacement Parts & Accessories

    Keep your equipment running strong with genuine parts and accessories. We carry coils, batteries, chargers, protective gear, digging tools, and more — fully compatible with your detector and backed by manufacturer standards. Not sure what fits your model? Just ask — we’re here to help.

    Training & Tutorials

    New to detecting or upgrading to advanced equipment? Our resource library includes helpful guides, maintenance tips, how-to videos, and expert advice from experienced detectorists. From ground balancing and coil choices to target ID basics and field technique, you’ll find the knowledge you need to level up your success.

    Customer Questions & Expert Answers

    Get real answers from outdoor explorers and our product experts. Browse questions about performance, features, and setup — or ask your own to make sure this gear fits your next adventure.

    Does the Falcon MD20 Gold Tracker with handle and holster bundle include headphones?

    No, the Falcon MD20 Gold Tracker with handle and holster bundle does not include headphones. You get the MD20 detector, the 28 inch 3-piece foam-grip handle, and the belt holster. The MD20 has a built-in speaker plus a 1/8 inch headphone jack, so it works out of the box, and you can add the Falcon MD20 headphones later if wind noise on a claim makes faint signals hard to hear.

    Answered by John W. · September 2026

    How long do the batteries last in the Falcon MD20 Gold Tracker?

    The batteries in the Falcon MD20 Gold Tracker last 40 to 50 hours. The MD20 runs on two standard 9V alkaline batteries rather than a proprietary pack, so spares are easy to find on the way to a claim. If sensitivity drops or the detector starts falsing in clean ground, swap the batteries before suspecting calibration. Browse the rest of our Falcon detectors and accessories for spare parts.

    Answered by Richard T. · September 2026

    Can I use the Falcon MD20 belt holster and 3-piece handle at the same time?

    Yes, you can use the Falcon MD20 belt holster and 3-piece handle at the same time, and that is how this bundle is meant to be worn. The 14 oz control box rides in the holster on your belt, keeping the batteries, speaker and controls out of the water, while the waterproof probe sits in the end of the 28 inch handle with its 5 foot cable threaded up through the sections. See our full range of metal detector parts and accessories for other MD20 add-ons.

    Answered by Dan P. · September 2026

    Still have a question?

    Ask our detecting specialists. We answer most questions within one business day, and publish the useful ones here so other detectorists benefit too.

    0 / 1200

    Your question and our answer will be published on this page, shown with your first name.

    Protected by reCAPTCHA. We only use your email to send you the answer.

    Customer Reviews & Field Feedback

    See what real detectorists and prospectors are saying. Read authentic experiences from the field, discover what users love most, and learn how this product performs in real-world conditions. Share your own review to help fellow explorers choose with confidence.

    Recently Viewed Gear

    Last products you explored