Get real answers from outdoor explorers and our product experts. Browse questions about performance, features, and setup — or ask your own to make sure this gear fits your next adventure.
The Nokta PulseDive scuba detector package pairs the PulseDive with the 20 cm (8 inch) yellow scuba coil, the larger of Nokta's two scuba coils. The PulseDive is a pulse induction underwater detector that Nokta rates IP68, waterproof to 60 meters (200 ft). It alerts by audio, vibration or both, with an LED indicator, has an LED flashlight, and runs on a built-in 1650 mAh lithium polymer battery that charges in about 2 hours.
| Configuration | |
|---|---|
| Detector | Nokta PulseDive, pulse induction, 3 kHz |
| Coil | 20 cm (8 in) yellow scuba coil |
| Waterproof | IP68, 60 m (200 ft) |
| Power | 1650 mAh lithium polymer, about 2 hours to charge |
What is in the box with the Nokta PulseDive
Nokta's standard contents for the PulseDive scuba detector with 8 inch scuba coil
- Nokta PulseDive scuba detector with 20 cm (8 inch) yellow scuba coil and cover
- Security lanyard
- Rubber wristband
- USB charging cable
- Dust protection cap
- User manual
Who the Nokta PulseDive suits
We like the PulseDive as a compact underwater detector with a modular design. Nokta built it as a modular platform, and this package sets it up as a small scuba detector. Pulse induction is what makes it interesting underwater, particularly in saltwater.
Where the Nokta PulseDive works well, and where it does not
Saltwater: in a saltwater swimming area, conductive water interferes with some detectors. Nokta says pulse induction gives very stable operation in saltwater or any type of soil. It does not eliminate every false signal.
Depth: Nokta rates the PulseDive waterproof to 60 meters (200 ft), a lot for a compact detector working underwater around rocks or sand. Diving safety procedures still apply.
Scuba coil: the 20 cm (8 inch) scuba coil in this package is useful for covering small underwater areas. Nokta also makes a 14 cm (5.5 inch) scuba coil, which we would consider for confined spots, and a pointer coil converts the PulseDive into a pinpointer, as in the PulseDive 2-in-1 set. Nokta says never to change coils underwater, so make any swap on the surface.
Settings that matter on the Nokta PulseDive
Alerts: audio, vibration, or audio and vibration together, plus an LED indicator. Vibration is especially useful underwater, where audio can be hard to hear.
Dive Mode: locks the buttons so water pressure cannot press them. Learn the control sequence before you enter the water.
Rapid Retune: one press of the on/off and retune button retunes the detector. Around mineralized rocks, when the PulseDive becomes unstable, a retune may restore a usable response. It does not remove every source of interference, and Nokta says not to retune over metal.
Lost Alarm: after 5 minutes with no button press and no target, it beeps and the LED flashes. Useful for a compact device you set down for a moment, but no guarantee you will get it back.
About the Nokta PulseDive
Nokta lists the PulseDive scuba detector with the 8 inch coil at 550 g (19.4 oz) including the coil cover, and 45 cm (17.7 inch) long. The LED flashlight lights the spot you are searching, and the red LED flashes faster as you close in on a target. LED patterns at start-up show the battery level, and the PulseDive gives a single beep when it shuts down on an empty battery.
An internal wireless module connects Nokta wireless headphones. The headphones stop working in Dive Mode and reconnect on their own when you leave it, and while the wireless connection is on but not yet paired, the PulseDive searches for a channel and will not detect metal, so pair the headphones before you start searching.
One mistake to avoid with the Nokta PulseDive
Expecting a numerical target ID. The PulseDive alerts by sound, vibration and light, with no target ID number, so plan to recover what it signals.
Our recommendation on the Nokta PulseDive
We recommend the PulseDive scuba detector as a compact PI detector for underwater searching. Its strongest points are deep waterproofing and pulse induction operation. See all Nokta pinpointers.
Nokta PulseDive specifications
| Specification | Nokta PulseDive |
|---|---|
| Operating principle | Pulse induction |
| Operating frequency | 3 kHz |
| Waterproof | IP68, 60 m (200 ft) |
| Sensitivity | 5 levels |
| Frequency shift | Yes |
| Alerts | Audio, vibration, audio and vibration; LED |
| Features | LED flashlight, Dive Mode button lock, Rapid Retune, Lost Alarm, wireless headphone module |
| Scuba coils (Nokta) | 20 cm (8 in) and 14 cm (5.5 in) |
| Weight | 550 g (19.4 oz) with coil cover |
| Length | 45 cm (17.7 in) |
| Battery | 1650 mAh lithium polymer |
| Charging time | About 2 hours |
| Storage temperature | -20 to 60 °C (-4 to 140 °F) |
| Warranty | 2 years |
Nokta covers the PulseDive with a 2-year limited warranty.
Coils and accessories for this detector are in our Nokta PulseDive collection.
Customer Questions & Expert Answers
Does the Nokta PulseDive with the 8" scuba coil include the pinpointer coil?
Do wireless headphones come with the Nokta PulseDive?
How much does the Nokta PulseDive weigh, and how long does it take to charge?
Customer Reviews & Field Feedback
See what real detectorists and prospectors are saying. Read authentic experiences from the field, discover what users love most, and learn how this product performs in real-world conditions. Share your own review to help fellow explorers choose with confidence.
Recently Viewed Gear
Last products you explored