Quest X1 IDMAXX Metal Detector

The Quest X1 IDMAXX is the entry model in Quest's compact X Series, for first-time detectorists, families and travelers who want a simple detector that packs small. It runs at 12 kHz VLF with a 9 x 5 inch TurboD Blade search coil and three search programs (Coin, Jewelry and All Metal), and the three-section shaft sets up at adult or junior length. It charges over USB-C, and Quest's quick start guide gets you swinging.

What is in the box with the Quest X1 IDMAXX

Quest's standard contents for the X1 IDMAXX

• Quest X1 IDMAXX control box with handle
• TurboD Blade 9 x 5 inch waterproof search coil with coil cover
• Three-section shaft set (adult or junior configuration)
• Two-piece armrest set
• USB-C charging cable
• Quick start guide (we also sell the Quest X1 IDMAXX quick start guide as a digital download)

Who the Quest X1 IDMAXX suits

What appeals to us about the Quest X1 IDMAXX is its place as the entry point to Quest's compact X Series. For someone who wants to try metal detecting without a large investment, simplicity matters most.

Families and travelers: picture packing a detector for a family vacation. You want something that stores easily and does not need complicated assembly, and the compact X Series design suits that well.

First-time detectorists: a beginner should learn to recognize a target, pinpoint where it is and recover it responsibly. We would not overwhelm a new detectorist with adjustments they do not need yet, and the X1 keeps the controls straightforward.

Quest X1 IDMAXX programs and controls

Quest gives the X1 three search programs:

• Coin: very stable with medium recovery speed; Target IDs 4 to 9.
• Jewelry: very sensitive with high recovery speed, for gold rings and jewelry; Target IDs 2 to 9.
• All Metal: high recovery speed and zero discrimination, good for gold prospecting; Target IDs 0 to 9.

The display shows a single-digit Target ID by conductivity with a five-bar indication segment, plus depth, sensitivity, audio level, search mode and battery level. The audio answers with low, middle and high tones by Target ID. Dedicated buttons cover power and menu, pinpoint, sensitivity up and down, ground balance (hold the button and pump the coil above the ground), speaker volume and a built-in flashlight. Wired headphones plug into the 3.5 mm connector under a moisture and dust cover.

Quest says the X1 can withstand heavy rain but that submersion can damage it, so keep the control box out of the water and the weather cap over the USB-C port. A full charge takes about 4 hours from a USB wall charger, and the X1 weighs 0.95 kg (2.1 lb).

Quest X1 IDMAXX, X5 IDMAXX or X10 IDMAXX

The X1 sits below the Quest X5 IDMAXX and the Quest X10 IDMAXX. Both of those run at 12 kHz like the X1, show two-digit Target IDs and are waterproof to 3 meters (10 feet); the X10 adds the larger Blade11 coil, a User mode, a ten-segment Target ID scale and wireless headphone support. Choose the X1 for simplicity and portability, and step up when you want those features.

One mistake to avoid with the Quest X1 IDMAXX

Expecting every feature of the X5 or X10. Quest positions the X1 as the entry level model of the X Series, so compare the features before you choose.

Our recommendation on the Quest X1 IDMAXX

We see the X1 as an introductory detector for people who put simplicity and portability first. New to the hobby? Our beginner and intermediate detectors compare it with other first detectors, and our digging tools cover recovery.

Quest X1 IDMAXX at a glance

Quest's 2-year manufacturer warranty covers the X1 IDMAXX, and as an authorized Quest dealer we help with any warranty question.

Every Quest detector, coil and accessory we carry is in our Quest metal detectors collection.