XP DEUS Metal Detector with Remote, WS5 Headphones and 11" X35 Coil

The XP DEUS with the remote control, WS5 full-size wireless headphones and 11 inch X35 coil is built for experienced coin and relic hunters who enjoy fine-tuning detector settings and want a light, wireless single-frequency detector with detailed control over Reactivity, frequency and ground balance, with a larger coil for coverage on open fields. The remote holds every setting on its screen, and the WS5 has its own tuning interface with Target ID. XP's pack code is DEUS-28X35RCWS5.

What is in the box with the XP DEUS

XP's standard contents for the DEUS with remote, WS5 and 11 inch X35 coil (XP part DEUS-28X35RCWS5)

• XP S-Telescopic stem, fully telescopic
• 11 inch (28 cm) X35 waterproof wireless search coil (XP reference D28X35)
• 11 inch coil cover
• XP DEUS remote control
• Belt-mounted case for the remote control
• USB cable with one mini-B plug
• Mains transformer-charger
• XP WS5 full-size wireless headphones
• USB cable with three mini-B plugs
• Connection clamp for recharging the coil
• Coil hardware and spare parts (2 screws, 2 wing nuts, 1 washer, 1 spacing washer)
• Owner's manual

How the XP DEUS remote control runs the detector

XP describes the remote control, also called the control module or RC, as the part that lets you adjust the internal settings of your DEUS. Programs, frequency, discrimination, sensitivity, ground balance, Reactivity, tracking and volume are all set from it, with the Target ID on its 8192-pixel display and a backlight XP describes as very low power consumption. The remote weighs 100 g and rides on the stem or on your belt in XP's belt-mounted case. XP's MI-6 pinpointer can pair wirelessly with the DEUS remote control; see our XP pinpointers. XP's DEUS updater covers the remote control, headphones and coil software, loaded through the DEUS USB cable with an internet connection.

XP's WS5 is a full cup wireless headset for the DEUS, designed to fit comfortably over your ears and isolate outside noise. It has its own tuning interface with Target ID, folds for storage, weighs 255 g, and XP rates it showerproof and rainproof. With the remote on the stem or belt, the WS5 gives you a second way to change settings from the headset. XP says the WS5 can also drive the detector alone, so the remote can stay home when you want the lightest setup.

The 11 inch X35 coil

The 11 inch (28 cm) X35 coil, XP reference D28X35, runs 35 frequencies from 3.7 to 27.7 kHz, weighs 470 g and carries its own battery, rated at about 15 hours depending on frequency and power. XP rates it fully waterproof up to 6 meters (20 feet), and it fits the XP DEUS and the XP ORX. XP lists five coils for the DEUS: the 9 inch, 11 inch and 13 x 11 inch X35 coils and the 9 inch round and 9.5 x 5 inch elliptical HF coils.

XP's X35 and HF coil families also offer different frequency choices, so not every DEUS coil gives the same frequencies; we would always check the coil named on a DEUS configuration before planning around a frequency. See our wireless search coils.

XP lists the DEUS at 900 g (about 2 lb) complete with the remote control, and 800 g without the remote; the 11 inch X35 coil weighs 470 g against 370 g for the 9 inch.

About the XP DEUS

What we like about the original XP DEUS is its exceptionally lightweight wireless construction, fast target response and extensive adjustment options. XP calls it "the first fully wireless detector", and it helped establish XP's reputation for wireless metal detectors: the coil sends its signal over XP's own digital radio link, without a coil cable, to the control unit, which is the remote control or XP's WS4 or WS5 headphones depending on the configuration. Adjustable Reactivity, selectable frequencies, detailed audio and discrimination settings and ground balance controls make the DEUS appealing to experienced coin and relic hunters who enjoy fine-tuning detector settings, particularly on iron-contaminated historical sites.

One distinction matters before you buy. The original DEUS is a selectable single-frequency detector: it runs one frequency at a time. It does not use the simultaneous FMF multi-frequency technology found in XP's DEUS II, ICON and ICON-X. We would choose the original DEUS when lightweight wireless operation and advanced single-frequency control are the priorities.

Selectable frequencies on the XP DEUS

With an X35 coil the DEUS offers 35 frequencies from 3.7 to 27.7 kHz, and you choose one at a time. Frequency selection is one of the settings worth learning, and the frequencies available depend on the installed coil. No single frequency detects deeper or finds more targets in every situation, because target size, conductivity, orientation, ground mineralization and coil choice all influence the result.

Reactivity, discrimination and audio on iron-heavy sites

Picture an old farm field with iron nails and scattered brass relics. We would experiment with Reactivity and discrimination there while paying attention to short, repeatable non-ferrous signals. A good target can lie close to a nail, and when the coil passes over both objects their responses can interfere with one another. The DEUS cannot reliably detect every desirable target hidden among iron; iron masking remains a limitation.

• Reactivity: XP's term for how quickly the detector responds to nearby targets, and one of the settings we would learn first, along with ground balance, discrimination, audio response and frequency selection.
• Discrimination: reducing discrimination lets more questionable signals be heard, and on an iron-contaminated relic site we would experiment with it alongside Reactivity.
• Audio: audio response is one of the settings worth learning, and on iron-heavy ground we listen for short, repeatable non-ferrous signals. No tone identifies an object with certainty: a deep coin, rusty iron and other metal objects can all produce confusing responses.

Ground balance and factory programs

Ground balancing compensates for the ground's own electromagnetic response, and the DEUS offers tracking as well as a fixed ground balance. Ground balance is one of the settings we would learn early.

The DEUS comes with 10 factory programs (P1 to P10, from BASIC to GOLD FIELD in XP's list), and you can modify them and save 8 more user programs (P11 to P18).

Where the XP DEUS works well, and where it does not

Iron-contaminated historical sites, relic hunting and inland coin hunting are where the DEUS is most interesting, because its control over Reactivity, frequency and audio gives an experienced operator room to work difficult ground. See more relic and treasure metal detectors. For regular saltwater beach hunting we would recommend the XP DEUS II instead, because its FMF technology provides a more suitable platform.

Water ratings differ by part. XP rates the 11 inch X35 coil fully waterproof up to 6 meters (20 feet), but states that the DEUS remote control is not waterproof. XP rates the WS5 headset showerproof and rainproof. With the remote not waterproof, the complete DEUS is not a diving detector.

Original XP DEUS or XP DEUS II

The DEUS II adds simultaneous FMF technology and a fully waterproof detector platform, along with additional audio and operating capabilities. For someone who regularly searches saltwater beaches or wants simultaneous multi-frequency operation, those differences may justify choosing the XP DEUS II.

XP DEUS wireless design, weight and charging

The wireless design and the light telescopic stem keep the DEUS light, there is no coil cable to catch on brush, and the detector collapses for transport. Light weight is about comfort and portability, not depth or target identification.

The coil, the remote control and the headphones each carry their own lithium polymer battery. XP gives about 15 hours for the X35 coil, depending on frequency and power, about 20 hours for the remote and the headphones, and about 3 hours to charge all three together. XP rates operating and charging temperatures from 10 to 40 °C (50 to 104 °F).

One mistake to avoid with the XP DEUS

The mistake we warn about is confusing the original DEUS with the DEUS II. The original DEUS runs one frequency at a time and is not a simultaneous multi-frequency detector, and the frequencies available depend on the installed coil.

Who we would recommend the XP DEUS to

We recommend the original XP DEUS to experienced coin and relic hunters who enjoy fine-tuning detector settings, particularly on iron-contaminated historical sites. Choose it when lightweight wireless operation and advanced single-frequency control are the priorities.

XP DEUS specifications

XP warrants the DEUS against defects in materials or workmanship for 5 years from purchase; batteries, chargers and connectors carry a 2-year warranty, and XP asks for proof of purchase. The DEUS is made in France and LONGTIME certified.

Every XP DEUS configuration we carry is in our XP DEUS collection.