Garrett All Terrain Dig Pouch with Mesh Drain Bottom and Pro-Pointer Holster

The All Terrain Dig Pouch holster fits the Garrett Pro-Pointer AT, Pro-Pointer II, and AT Pro Pointer models. The holster is designed specifically for Garrett Pro-Pointer models and may not accommodate pinpointers from other manufacturers. If you run a Garrett detector and already own one of these pinpointers, the holster provides quick access without requiring a separate belt-mounted holster that can snag on vegetation or get knocked loose during water hunts. The integrated holster design keeps your pinpointer secure and readily accessible while you're recovering targets in the field or surf zone.

The mesh drain bottom on the All Terrain Dig Pouch automatically sifts dirt and sand while you're detecting, which speeds up recovery time on beach hunts and water detecting sessions. Very small items like earring backs, thin wire fragments, and delicate chain links may fall through the mesh depending on their size and where they land in the pouch. Our team secures high-value small finds on the interior carabiner clip immediately after recovery to prevent loss. The small outer pocket provides additional secure storage for tiny items like gold earrings or delicate jewelry that you want to keep separate from larger finds in the main compartment.

The All Terrain Dig Pouch features water-resistant zippers that resist splashing and brief water exposure during surf-zone detecting and shallow wading. The mesh drain bottom allows water to flow through freely, making it ideal for beach hunts and water detecting where the pouch may get wet. Our team uses this pouch for surf-zone detecting and shallow wading where occasional wave splashes occur. For deeper water detecting where the pouch will be fully submerged for extended periods, consider a fully sealed waterproof pouch instead. You can compare other options in our metal detector bags, backpacks, cases, pouches and covers collection.

The adjustable extended belt on the All Terrain Dig Pouch distributes weight across your hip and is designed for all-terrain use with durable construction. The pouch features multiple storage compartments including two large zippered pockets and a main mesh compartment that holds recovered finds during your detecting session. Our team empties the pouch after filling the main mesh compartment about two-thirds full with clad coins and junk targets, which typically happens after 60 to 90 minutes of productive beach hunting. The reinforced stitching at the belt attachment points provides durability during extended use, and you can adjust the belt tighter as needed to maintain a secure fit while detecting.

The All Terrain Dig Pouch uses an adjustable extended belt that accommodates waist sizes from 28 inches to 48 inches, which is wide enough to fit over a 3mm to 5mm wetsuit or layered winter clothing without restricting movement. Our team runs this pouch during Gulf Coast winter sessions with a fleece base layer and windbreaker, and the belt extends far enough to cinch securely without maxing out the adjustment range. If you wear a drysuit or thicker layered clothing that pushes your effective waist size above 48 inches, the belt may not reach, and you'll need to use a separate belt extender or clip the pouch to a gear vest instead.

The All Terrain Dig Pouch is designed as a belt-mounted pouch with an adjustable extended belt that fits a wide range of sizes. The pouch does not include dedicated harness attachment points, as it's optimized for belt wear during land and water detecting. Some detectorists thread a separate carabiner through one of the belt loops and clip it to a harness hip strap, but this creates an off-center hang that shifts during movement. If you prefer harness-mounted storage, look for pouches specifically designed with harness attachment points rather than adapting a belt pouch.

The All Terrain Dig Pouch has two large zippered pockets that allow you to separate treasure from trash during your detecting session. You decide which pocket holds keepers and which holds junk based on your preference. Our team uses the front zippered pocket for clad coins and keeper finds, and the rear zippered pocket for pull-tabs and bottle caps, which keeps trash separate without cross-contaminating the keeper pocket. Both pockets use water-resistant zippers that resist salt corrosion better than standard coil zippers, making them ideal for beach detecting and water hunts. For additional tips on organizing your finds in the field, check our practical detecting tips.

The interior carabiner clip on the All Terrain Dig Pouch is designed for securing rings and small items as specified in the product features. The clip is intended for high-value small finds like wedding rings or gold earrings that you want to keep separate from the bulk of clad coins in the main mesh compartment. Our team uses the clip exclusively for small jewelry and valuable finds during detecting sessions. If you need to carry keys or a smartphone, use one of the zippered pockets instead, which have water-resistant closures and provide more secure storage for larger personal items during your hunt.

The All Terrain Dig Pouch features durable construction for all-terrain use and water-resistant zippers that handle beach detecting conditions. The mesh drain bottom automatically sifts dirt and sand during use, which helps keep the pouch cleaner in the field. Our team rinses the pouch under a garden hose after each Gulf Coast beach session to remove residual sand and salt, then hangs it to air-dry in a shaded area. The reinforced stitching and water-resistant zippers hold up well to repeated freshwater rinsing. For specific care instructions beyond field rinsing, consult the manufacturer's guidelines or contact Garrett directly for recommended maintenance procedures.

The All Terrain Dig Pouch is compatible with any metal detector brand and is not Garrett-specific in terms of attachment or fit. The adjustable extended belt works with detectors from any manufacturer, and the mesh drain bottom and zippered pockets function the same regardless of which detector you swing. The built-in holster is sized for Garrett Pro-Pointer models, so if you run a different pinpointer brand with a different body size, it may not fit securely in the holster. Our team has used this pouch with Minelab, Nokta, and Fisher detectors on beach hunts, and it functions identically across brands. Browse our full range of unpadded carry bags if you need a pouch optimized for a different pinpointer brand.