XP Deus 9.5" Elliptical Coil Cover for High-Frequency Search Coils

This coil cover fits the XP Deus 9.5" elliptical DD high-frequency waterproof search coil. The custom elliptical shape is designed specifically for this coil's elongated geometry and will not fit round coils or other elliptical sizes in the XP lineup. Verify your coil model before ordering, as the 9.5" elliptical DD is a distinct size from the 11" round or 13x11" FMF elliptical coils. If you run multiple coils, you'll need a separate cover sized for each one. Check our xp metal detectors - authorized us dealer collection for covers matching your other coils.

The XP Deus 9.5" elliptical coil cover reduces false signals by preventing the coil from scraping directly against rocks, roots, and metal debris during sweeps. When an unprotected coil strikes a hard object, the impact can generate a false tone that mimics a target signal, especially in high-sensitivity programs. The polymer cover absorbs the impact and dampens the noise, letting you focus on genuine target responses. Detectorists hunting rocky sites or construction fills report cleaner audio when running a cover, particularly in all-metal or threshold-based modes where ground noise is already elevated.

Yes, you can detect in water with the coil cover installed on the XP Deus 9.5" elliptical DD coil. The cover is designed to fit over the waterproof coil housing and does not interfere with the coil's waterproof rating. The polymer material allows water to flow through without trapping air pockets that could affect buoyancy or signal transmission. Rinse the cover with fresh water after saltwater or mineralized-water hunts to clear sand and salt buildup from the grid pattern. The cover protects the coil's waterproof seal from impacts with submerged rocks and shells that could compromise the housing over time.

Replace the XP Deus 9.5" elliptical coil cover when the polymer wears thin enough to expose the coil housing beneath or when cracks develop that no longer provide impact protection. Detectorists hunting rocky terrain daily may wear through a cover in 6 to 12 months, while those working softer ground or sand may get 2 years or more from a single cover. Inspect the cover after every few hunts for wear patterns, especially along the leading edge and center where ground contact is heaviest. A worn cover is far cheaper to replace than a damaged coil, so swap it out before the coil housing shows wear.

The XP Deus 9.5" elliptical coil cover does not measurably affect detection depth or sensitivity when properly installed. The thin polymer construction sits flush against the coil housing without adding significant distance between the coil and the ground. Field tests show no difference in target response or depth readings on coin-sized targets in air tests or buried-target scenarios. The cover's grid pattern allows electromagnetic fields to pass through without attenuation. Any perceived depth loss is typically due to improper installation or debris trapped between the cover and coil, so ensure a clean, tight fit before hunting.

Yes, you can install the XP Deus 9.5" elliptical coil cover without tools. The custom-fit design stretches over the coil housing and secures with friction. Start by aligning the cover's elliptical shape with the coil's long axis, then work the edge over the coil housing starting at one end and rolling it toward the other. The polymer is flexible enough to stretch during installation but firm enough to stay in place during field use. Clean the coil housing before installing the cover to ensure a tight seal and prevent dirt from getting trapped underneath. Learn more about coil construction and maintenance on our metal detector technologies page.

The XP Deus 9.5" elliptical coil cover is made from a durable protective polymer designed to withstand repeated impacts with rocks, roots, and abrasive surfaces. The material is flexible enough to absorb shocks without cracking but rigid enough to maintain its elliptical shape during sweeps. The grid pattern molded into the polymer distributes impact forces across the cover's surface, preventing concentrated stress points that could lead to premature wear. The polymer is resistant to saltwater, freshwater, and UV exposure, making it suitable for beach detecting, river hunting, and long-term outdoor storage.

No, the XP Deus 9.5" elliptical coil cover is designed to fit directly over the coil housing and will not accommodate an additional coil protector plate underneath. The cover's custom elliptical dimensions are sized for the bare coil, and adding a protector plate would prevent the cover from seating properly. If you currently run a protector plate, you'll need to remove it before installing this cover. The polymer cover provides equivalent protection to a hard plate while offering better shock absorption and quieter operation in rocky ground.

Clean sand and mud from the XP Deus 9.5" elliptical coil cover by rinsing it with fresh water after each hunt. The grid pattern can trap sand, shells, and small pebbles, so use a soft brush or your fingers to work debris out of the recessed areas while rinsing. For saltwater beach hunts, soak the cover in fresh water for a few minutes to dissolve salt crystals before brushing. Avoid high-pressure hoses that could force debris between the cover and coil housing. Let the cover air-dry before storage to prevent moisture from accumulating between the cover and coil. Check our metal detector parts & accessories collection for other maintenance supplies.

XP coil covers are wear items designed to absorb damage that would otherwise affect the search coil, so they are not typically covered under XP's standard detector warranty. The cover's lifespan depends on hunting conditions and frequency of use, with rocky terrain wearing covers faster than soft soil or sand. As an authorized XP dealer, we stock replacement covers and can help you determine when a cover needs replacement based on wear patterns. The cover's low cost relative to a replacement coil makes it a cost-effective insurance policy for protecting your investment in the 9.5" elliptical DD coil.