XP Deus II Charging Cable - Charge RC, Coil, Headphones, and Update Software

This cable charges the XP Deus II remote control, coil, and headphones simultaneously when connected to a 5V/1A USB power source. The round 6-pin connector plugs into the remote control, and the two USB mini-B connectors attach to the headphones and the coil's charging clamp (the clamp is a separate accessory that attaches to the coil's charging contacts). A single USB wall adapter or portable battery pack can power all three components overnight, eliminating the need to rotate components through separate charging cycles. Detectorists running multi-day field hunts use this cable to charge the entire Deus II system from one USB port.

This cable serves as the data connection for XP Deus II firmware updates when connected to a computer running XP's update software. The round 6-pin connector carries both power and data, so plugging the cable into a computer's USB port and connecting the 6-pin end to the remote control allows the update software to communicate with the detector. XP releases periodic firmware updates that add features and fix bugs, and this cable is the required data link for installing those updates. After the update completes, the cable can remain connected to charge the remote control, or you can switch to a USB wall adapter for faster charging.

The XP Deus II Charging Cable requires a USB power source rated at 5V/1A minimum to charge the remote control, coil, and headphones simultaneously. Most modern USB wall adapters, car USB adapters, and portable battery packs meet this specification, and you can verify the output rating on the adapter's label. Higher-amperage USB sources (2A or 3A) are safe to use and may charge the components slightly faster, but 1A is sufficient for overnight charging. Detectorists hunting in remote areas often use a portable USB battery pack rated at 10,000mAh or higher to charge the Deus II system multiple times without access to wall power. Check out the technologies behind modern detectors for more on power management in wireless detecting systems.

The coil charging clamp is not included with this cable and must be purchased separately. The clamp attaches to the coil's charging contacts and provides a USB mini-B port that connects to one of the cable's two mini-B connectors. XP sells the charging clamp as a separate accessory (part number varies by coil model), and detectorists who want to charge the coil alongside the remote and headphones need to add the clamp to their order. The cable's two USB mini-B connectors are designed for the headphones and the clamp, so without the clamp, you can still charge the remote and headphones simultaneously.

You can charge the XP Deus II remote control or headphones individually using this cable without connecting all three components. The round 6-pin connector works independently to charge the remote control when plugged into a USB power source, and either of the two USB mini-B connectors can charge the headphones on their own. The cable's multi-connector design allows flexible charging, so detectorists can charge only the components that need power. This flexibility is useful when one component drains faster than the others during a long hunt, and you need to top off a single device before heading back to the field with your XP Metal Detectors setup.

Charging time for the XP Deus II system depends on the battery levels of the remote control, coil, and headphones, as well as the amperage of your power source. When charging all three components simultaneously from a single 1A USB source, the charge time may extend because the output is divided among three devices. A higher-amperage USB source (2A or 3A) can reduce this duration. Detectorists running overnight field camps usually plug in before sleep to ensure a complete charge cycle. For a deeper look at power management architectures in wireless components, check out our guide to modern metal detector technologies.

This cable is designed specifically for the XP Deus II system; verify compatibility before use with other XP models. The round 6-pin connector and dual USB mini-B design match the Deus II charging architecture, and XP engineered this cable to work with the Deus II remote control, coil charging clamp, and headphones. Detectorists who own multiple XP detector models should confirm connector compatibility before purchasing, as different XP systems may use different charging interfaces. If you're upgrading to the Deus II from an earlier XP model, check that your existing charging cables match the new system's connector types to avoid compatibility issues in the field.

If the XP Deus II Charging Cable stops charging the remote control, coil, or headphones, first check that the connectors are fully seated in their ports and that the USB power source is delivering 5V/1A. Loose connections or underpowered USB adapters are the most common causes of charging failures, and reseating the connectors or switching to a different USB adapter often resolves the issue. If one connector charges but another doesn't, the cable may have a damaged wire or connector, and you'll need a replacement cable. XP's warranty covers manufacturing defects, and Serious Detecting can assist with warranty claims or provide a replacement cable if the original fails within the warranty period.