XP Deus II Remote Control 1 Meter Waterproof Cap (Gray)

The XP Deus II 1-meter waterproof cap is designed for the standard Deus II remote control unit that ships with the RC (remote control) configuration of the detector. The cap installs on the remote's accessory port and replaces the standard plug when you need shallow-water protection or pressure balancing. This cap is specifically engineered for RC configuration remotes and provides reliable sealing for wet environments, variable altitude hunts, and temperature changes. If you run the RC configuration and hunt wet environments or experience altitude or temperature variations, this is the correct cap for your remote control unit.

With the 1-meter waterproof cap installed, the Deus II remote control is rated for submersion up to 1 meter (3.3 feet) deep. This depth rating covers wet sand hunts, shallow creek crossings, and light surf work where the remote might briefly go underwater while you dig or retrieve a target. The sealed membrane in the cap blocks water ingress while allowing air to pass through, so internal pressure stays balanced even when the remote is submerged. Do not exceed the 1-meter depth limit, as deeper immersion risks water entering the housing and damaging the electronics. Always verify the cap is properly installed before exposing the remote to water.

The sealed membrane in the 1-meter waterproof cap serves two functions: it blocks water from entering the remote control housing while allowing air to migrate through, which balances internal pressure during temperature or altitude changes. When you move from a warm car to cold air, or from sea level to elevation, the air inside the remote expands or contracts. The membrane lets air equalize while keeping water molecules out, preventing housing distortion and seal failure. This makes the cap reliable for all-day hunts in variable conditions, not just wet environments. The pressure-balancing feature protects the remote's internal components across diverse hunting scenarios. Learn more about pressure-balancing technologies in our guide to metal detector technologies.

You can use the 1-meter waterproof cap on dry land without any performance penalty. The sealed membrane design works equally well in dry conditions, and many Deus II owners install this cap as their everyday plug because the pressure-balancing feature prevents housing swelling during temperature or altitude changes that occur on any hunt. The cap provides consistent protection whether you are hunting parks, fields, or beaches. If you hunt varied terrain (parks one day, beaches the next), leaving the 1-meter cap installed full-time simplifies your setup and ensures the remote is protected whenever you encounter wet conditions or environmental changes.

To install the 1-meter waterproof cap, remove the existing plug from the remote control's accessory port. Inspect the port and the new cap to ensure both are clean and free of sand or debris, which can compromise the seal. Install the new cap into the port by hand, securing it firmly to create a waterproof seal. After installation, check that the cap sits flush against the remote housing with no gaps. The sealed membrane design ensures proper pressure balancing once installed. Before your first water hunt, test the seal by submerging the remote in a shallow container of water for a few minutes and inspecting for bubbles or moisture inside the housing.

The 1-meter waterproof cap does not interfere with the Deus II remote control's normal operation. The cap seals an accessory port on the remote housing and does not cover the antenna, block the display, or interfere with the internal circuitry. The sealed membrane in the cap is air-permeable, so it does not create a pressure differential that would stress the housing or affect internal component performance. Install the cap and hunt as you normally would. The cap's design focuses on water protection and pressure balancing without compromising the remote's functionality during detection operations.

The 1-meter waterproof cap uses a sealed membrane that balances internal pressure while blocking water to 1 meter deep, making it suitable for wet sand, shallow creeks, and light surf. The membrane design prevents housing swelling during temperature or altitude changes by allowing air to equalize while keeping water molecules out. This pressure-balancing feature makes the 1-meter cap ideal for hunters who work in variable environmental conditions on land or in shallow water. If you hunt exclusively on land or in shallow water up to 1 meter depth, this cap provides the protection and pressure management you need. Explore XP accessories in our XP metal detectors - authorized US dealer collection.

The 1-meter waterproof cap's sealed membrane allows internal air to equalize with external pressure, which helps manage pressure changes during temperature variations. The membrane lets air migrate through slowly, so temperature-driven pressure changes are gradual rather than abrupt. This pressure-balancing function is the cap's primary design feature, protecting the remote housing from swelling or seal stress during environmental changes. To maintain optimal remote performance in humid conditions, store the remote in a climate-controlled environment before hunts and avoid rapid temperature swings when possible. The cap's membrane technology focuses on pressure management and water protection up to 1 meter depth.

The 1-meter waterproof cap is designed for common use on land or for submerged remote control up to 1 meter, and it provides pressure balancing to prevent the remote control from swelling during variations in temperature or altitude. Many Deus II owners install the cap and use it across multiple hunts, as it serves both wet-environment protection and pressure-management functions. The sealed membrane design works effectively in both dry and wet conditions. Periodically inspect the cap and port to ensure both remain clean and free of debris that could compromise the seal. Browse additional Deus II accessories in our metal detector parts & accessories collection.

The gray color is the standard option for the XP Deus II 1-meter waterproof cap and matches the gray finish of the remote control housing. This gray finish is the version supplied by XP for the Deus II RC configuration. The cap's sealed membrane design and pressure-balancing function are the key features, providing reliable water protection up to 1 meter depth and preventing housing swelling during temperature or altitude changes. For reliable sealing and proper function, use the gray cap as supplied by XP. Learn more about XP's design philosophy in our guide to metal detector technologies.