Underwater & Waterproof Metal Detectors

An underwater metal detector lets you hunt wet sand, surf, rivers, lake beds and dive sites to 250 feet. Every waterproof detector here is sealed to a manufacturer depth rating, so buy for the deepest water you work. No detector we carry is rated between 16 and 66 feet, so the real choice is a submersible or a dive machine.

Military Discount: Active or retired U.S. military may be eligible for 15% off select Minelab and Garrett detectors. See Military Discount Metal Detectors for details.

Open Box: Metal detectors with damaged or opened packaging, offered at a reduced price. Full manufacturer’s warranty included. Questions about a specific unit? Call us. See Open Box Metal Detectors.

What Makes a Metal Detector Waterproof?

A waterproof metal detector seals its electronics (control box, coil and shaft connections) against water up to a stated depth, past which the pressure is more than the seals can hold. A detector rated to 3 ft (1 m) handles rain and wading, while a true underwater metal detector stays sealed at swimming and diving depth. Water ratings come in four levels. On a fully waterproof detector, the kind on this page, the control box and coil both go under to the rated depth. A detector with a waterproof coil only lets you sweep the coil through puddles and shallow water while the control box stays dry. Weatherproof detectors have a control box that takes rain and spray but never submersion, and many of them also have a waterproof coil. Dry land detectors carry no water rating. Treat the rating as a hard limit, not a suggestion. Our post Can Metal Detectors Be Used in Water? covers the basics.

Waterproof Metal Detectors by Depth Rating

Depth rating is the cleanest way to choose an underwater metal detector, because it maps directly to how you hunt. Find the deepest water you will work, then shop that row or the one below it.

Depth ratingWhere it worksDetectors we carry
3 ft (1 m)Wet sand, wading and shallow creeksFisher Impulse AQ, Minelab GPZ 8000 (detector, coil and WM 14 to 1 m for up to 30 minutes), Nokta Midi Hoard, Quest Air (the IP68 rating covers the detector, not your phone)
10 ft (3 m)Surf wading, rivers and creek goldGarrett AT Pro, AT Max and AT Gold (fresh water), Minelab CTX 3030, Minelab SDC 2300, Nokta Magnetar 9000, Quest X5 and X10 IDMAXX
16 ft (5 m)Surf, swim areas and snorkelingMinelab MANTICORE, EQUINOX 900 and EQUINOX 700, X-TERRA ELITE and X-TERRA PRO, VANQUISH 560, 460 and 360; Nokta Legend 2, Triple Score, Double Score and Score, Simplex ULTRA and Simplex LITE, FINDX Pro, Gold Kruzer; Garrett Vortex VX9, VX7 and VX5; XP ICON and ICONX (5 m with XP's BH-02 headphones and waveguide; 1.5 m, 5 ft, with the original remote cap); Quest Q30+
66 ft (20 m)Snorkeling and shallow divingXP DEUS II with the RC remote (coils and remote IP68 to 20 m)
200 to 250 ft (60 to 76 m)Scuba divingMinelab EXCALIBUR II and Nokta PulseDive (60 m, 200 ft), Quest Scuba Tector Pro (rated for diving), Fisher CZ-21 and 1280X (250 ft, 76 m)

A common rating for fully submersible detectors is 16 ft (5 m), enough for surf, swim areas and snorkeling. For deeper tank dives, shop the bottom row; every model rated 66 ft and deeper is also in Scuba & Dive Metal Detectors.

Headphones, Remotes and Other Parts with Their Own Rating

A detector's depth rating covers the detector, not everything you plug into it, and wireless audio is the usual weak point. Nokta's manuals say the Bluetooth link works only while the control box is above water, so the Legend 2 and Score series go under with Nokta's wired waterproof headphones. Garrett says the AT Max's MS-3 Z-Lynk headphones should never be submerged and specifies hardwired waterproof headphones, and the Vortex series takes Garrett's submersible headphones. On the Minelab MANTICORE and EQUINOX 900, wired 3.5 mm (1/8 inch) waterproof headphones go on the capped socket.

The XP DEUS II shows why the whole setup matters. XP rates the FMF coils, the RC remote with its red diving cap and the BH-01 bone conduction headset IP68 to 20 m (66 ft). The WS6-ST and WSA-ST headphones are rainproof, and the WSA-XL ST is rated to 1 m, so DEUS II packages built around the WS6 Master sit with our waterproof coil detectors. The XP ORX is the same story: the coil is waterproof, the remote is not. Our headphones collection includes waterproof wired sets from Minelab, Garrett, Nokta, XP and Fisher.

Waterproof Is Not the Same as Saltwater-Ready

A seal keeps salt water out of the electronics; it does not make a detector stable on wet salt sand. For ocean beaches and the surf, pair the depth rating with multi-frequency or pulse induction technology. Our beach metal detectors collection is built around that ground.

Underwater and Waterproof Gold Detectors

Gold collects in water too, in the bedrock crevices of gold-bearing rivers and the black sand of placer streams. An underwater metal detector for gold lets you put the coil into those crevices and work wet bedrock without worrying about the control box. The fully waterproof gold detectors we carry are the Minelab SDC 2300, Nokta Magnetar 9000 and Garrett AT Gold, each rated to 10 ft (3 m), and the Nokta Gold Kruzer at 16 ft (5 m). The coils of the Minelab GPX 6000 and GPZ 7000 are waterproof to 1 m (3.3 ft), but their control boxes are weatherproof only, so they sit with our waterproof coil detectors. Compare the full nugget lineup in our gold detector collection, or read our waterproof gold metal detectors post.

Why Buy Your Waterproof Metal Detector from Serious Detecting?

  • Free Shipping on Orders Over $99: Your waterproof metal detector ships at no extra cost across the continental US.
  • Authorized Dealer for Every Brand We Carry: Showroom and local pickup in Ypsilanti, Michigan, the full manufacturer warranty on every detector and product registration support.
  • Help Before and After You Buy: Our staff answer setup, depth rating and headphone questions by phone at (844) 771-0707 or by email.

Customer Questions & Expert Answers

Get real answers from outdoor explorers and our product experts. Browse questions about performance, features, and setup —or ask your own to make sure this gear fits your next adventure.

What is the best underwater or waterproof metal detector?

The best underwater or waterproof metal detector is the one rated for the deepest water you will hunt, because a detector built for wading can flood if you take it deeper. Our picks by depth:

Surf and swim areas, to 5 m (16 ft): the Minelab EQUINOX 900, IP68 rated with Beach modes, for most beach and lake hunters.

Snorkeling and shallow diving, to 20 m (66 ft): the XP DEUS II with the RC remote and the BH-01 bone conduction headset, which XP rates IP68 to 20 m.

Scuba, to 60 m (200 ft) and deeper: the Minelab EXCALIBUR II at 60 m (200 ft) or the Fisher CZ-21 at 250 ft (76 m).

Gold in creeks and rivers: the Minelab SDC 2300, sealed to 3 m (10 ft) as a whole detector.

Our Best Underwater Metal Detectors guide ranks the picks in each depth tier.

Answered by John W. · April 2026

Can I use a waterproof metal detector in saltwater?

Yes, you can use a waterproof metal detector in saltwater: within its depth rating, salt water will not get into the electronics. How well it finds targets there depends on the technology, not the seal. Wet salt sand is conductive, so most single-frequency VLF detectors get noisy on it.

For ocean beaches and the surf, choose a simultaneous multi-frequency detector such as the Minelab EQUINOX 900 or Nokta Legend 2, or a pulse induction detector such as the Fisher Impulse AQ. A waterproof single-frequency detector like the Garrett AT Pro is at its best in fresh water.

After a salt hunt, rinse the detector, coil and shaft with fresh water. Our beach metal detectors are chosen for wet salt sand.

Answered by Dan P. · April 2026

How deep can waterproof metal detectors go?

Dive detectors such as the Fisher CZ-21 and Fisher 1280X are rated to 250 ft (76 m). The Minelab EXCALIBUR II and Nokta PulseDive are rated to 60 m (200 ft), and the Quest Scuba Tector Pro is also dive-rated.

Many fully waterproof detectors are rated to 5 m (16 ft), and the XP DEUS II with its RC remote reaches 20 m (66 ft). The rating is a maximum for the whole setup, so the lowest-rated part sets your limit: headphones, the remote or a pinpointer. Every model rated 66 ft and deeper is in our scuba and dive metal detectors.

Answered by Richard T. · April 2026

Can I use the Garrett AT Pro in the surf zone?

Yes, you can use the Garrett AT Pro in the surf zone: Garrett rates it submersible to 10 ft (3 m), which covers wading in the waves. It runs a single frequency of 15 kHz, so on wet salt sand it is noisier than a simultaneous multi-frequency detector.

The wired MS-2 headphones in the box are for dry use; for underwater audio Garrett specifies its submersible headphones. If you mostly hunt salt surf, Garrett's multi-frequency Vortex VX9 with its Multi-Salt mode or the Minelab EQUINOX 900 is built for that ground. In fresh water, the AT Pro and AT Max are strong choices.

Answered by Dan P. · April 2026

Are metal detectors waterproof?

Most metal detectors are not fully waterproof. Many have a waterproof search coil and a control box that must stay dry, such as the Garrett ACE Apex, Minelab GPX 6000 and XP ORX. You can sweep the coil through puddles and shallow water, but the detector cannot go under.

A fully waterproof detector seals the control box too and carries a depth rating, from 1 m (3 ft) on the Fisher Impulse AQ to 5 m (16 ft) on many land-and-beach models and 250 ft (76 m) on dive detectors. A weatherproof control box handles rain only, even when the coil is waterproof. Check the rating for the whole detector, then shop our waterproof coil metal detectors or the fully waterproof ones on this page.

Answered by John W. · April 2026

How much does an underwater metal detector cost?

An underwater metal detector costs from under $300 to over $5,000, depending on how deep it is rated and what it is built to find:

Under $300: waterproof entry detectors such as the Nokta Simplex LITE and Minelab VANQUISH 360, and handheld dive detectors such as the Nokta PulseDive and Quest Scuba Tector Pro.

$300 to $500: several 5 m (16 ft) multi-frequency surf detectors, such as the Nokta Score and Minelab X-TERRA ELITE.

$500 to $1,000: 5 m (16 ft) multi-frequency detectors a step up, such as the Minelab EQUINOX 700 and Garrett Vortex VX9.

$1,000 to $3,000: dive-rated detectors such as the Minelab EXCALIBUR II and Fisher CZ-21, and XP DEUS II RC packages.

$3,000 and up: waterproof gold detectors such as the Minelab SDC 2300 and Minelab GPZ 8000.

Answered by Richard T. · November 2026

Can I use a pinpointer underwater?

Yes, you can use a handheld pinpointer underwater if it is rated for the depth you hunt. The Garrett Pro-Pointer AT is IP68 waterproof to 20 ft (6 m), and the Nokta AccuPOINT is IP68 to 3 m (10 ft). For divers, the Nokta PulseDive is rated to 60 m (200 ft) and works as a pinpointer or a compact scuba detector, and the Groundtech IQ Detect is IP69 to 30 m (98 ft).

Match the pinpointer to the detector: with a detector rated to 5 m (16 ft), a pinpointer rated to 3 m (10 ft) sets your depth limit. Browse all pinpointers, or the dive-rated ones in our scuba and dive metal detectors.

Answered by Dan P. · November 2026

Still have a question?

Ask our detecting specialists. We answer most questions within one business day, and publish the useful ones here so other detectorists benefit too.

0 / 1200

Your question and our answer will be published on this page, shown with your first name.

Protected by reCAPTCHA. We only use your email to send you the answer.